hello,

sorry, i'd love to help you with this, but i never tried
to mount my fracrack modules in a doepfer frame.
maybe anybody else can help

best wishes

ingo

--- In Doepfer_a100@yahoogroups.com , sfrules <sfrules@t...> wrote:
>
>
> Hello, gang!
>
> Has anyone had any experience mounting Blacet modules in the same
case with
> Doepfer modules (I know the power is not compatible.)
>
> In theory, both are 5.25 inches high. In theory, that is, because
the
> Doepfer fact sheet says they are about 4.9 mm shorter:
>
> "Module front panels are all 3U high (1U = 1.75 inch = 1.75" =
44.45mm,
> 3U = 133.4 mm). The final height of the front panels is a bit less
than
> 133.4 mm as the rim of the mounting rails has to taken into
> considerattion. Consequently the final height is 128.5 mm for all A-
100
> front panels."
> http://www.doepfer.de/home_e.htm
>
> Sorry for the cross-post but IMHO both are excellent products
worthy of
> sharing space in a portable cabinet.
>
> sfrules