Thanks Rudy, I am not at all keen on drilling and soldering so I hope to take full advantage of the modular system. As I mentioned I am very new to this so when I recieve all my modules I will put them together as a system and then I will be able to see, with the guidance of good people like yourself, just what to patch to what. I think I understand what you are telling me but until I can actually physically do it I shall hold back.
Look forward to further input.
Thanks
Anthony Box

 
www.wizardwoodcraft.co.uk
 
Norfolk UK
 

>________________________________
> From: Rudy Toussaint < rudetee@... >
>To: " Doepfer_a100@yahoogroups.com " < Doepfer_a100@yahoogroups.com >
>Sent: Wednesday, 18 April 2012, 16:01
>Subject: Re: 1 Connecting 2 systems
>
>
>
> 
>
>Bare in mind Anthony that only the A-140,A-110 and A-111 will take the gate and cv from the bus provided byA-190. So far this is what I was able to hook up. I think it is possible to extract the bus signals (cv,gate)from your basic case but it requires some soldering,drilling etc...
>What I do is take the cv1 and gate from A-190 and patch it to my other OSC or ADSR that lives in other cases.The modular advantage.
>
>Rudy Toussaint
>
>________________________________
>From: Anthony < anthony.box@... >
>To: Doepfer_a100@yahoogroups.com
>Sent: Wednesday, April 18, 2012 10:15:07 AM
>Subject: 1 Connecting 2 systems
>
>
> 
>Hello, this is my first post and am looking for some help in connecting the common bus for 2 seperate systems.
>The first is the basic case 2 containing the following modules
>A110 x2 A145
>A114 A146
>A115 A160
>A116 A161
>A138 A180
>A120 A170
>A130 A138
>A131 A170
>A190 A140 x2
>A118
>The second is, or will be in the CL9case (for future expansion)
>Modules proposed
>A111-5, A150, A154, A155, A156 & A190-3
>I have 2 A185 modules and wish to make use of these to be able to connect the two systems. I am finding it difficult to understand what jumpers or connections need to be made to achieve a safe joining of the two systems. I also wish to be able to use them as seperate units from time to time.
>This is my first venture into modular synthesis and I am caught hook line and sinker as the saying goes.
>Any help would be very much appreciated.
>
>[Non-text portions of this message have been removed]
>
>
>
>
>

[Non-text portions of this message have been removed]