Bare in mind Anthony that only the A-140,A-110 and A-111 will take the gate and cv from the bus provided byA-190. So far this is what I was able to hook up. I think it is possible to extract the bus signals (cv,gate)from your basic case but it requires some soldering,drilling etc...
What I do is take the cv1 and gate from A-190 and patch it to my other OSC or ADSR that lives in other cases.The modular advantage.

Rudy Toussaint


________________________________
From: Anthony < anthony.box@... >
To: Doepfer_a100@yahoogroups.com
Sent: Wednesday, April 18, 2012 10:15:07 AM
Subject: 1 Connecting 2 systems


 
Hello, this is my first post and am looking for some help in connecting the common bus for 2 seperate systems.
The first is the basic case 2 containing the following modules
A110 x2 A145
A114 A146
A115 A160
A116 A161
A138 A180
A120 A170
A130 A138
A131 A170
A190 A140 x2
A118
The second is, or will be in the CL9case (for future expansion)
Modules proposed
A111-5, A150, A154, A155, A156 & A190-3
I have 2 A185 modules and wish to make use of these to be able to connect the two systems. I am finding it difficult to understand what jumpers or connections need to be made to achieve a safe joining of the two systems. I also wish to be able to use them as seperate units from time to time.
This is my first venture into modular synthesis and I am caught hook line and sinker as the saying goes.
Any help would be very much appreciated.




[Non-text portions of this message have been removed]