> Is there any way this planned module could be used to make quick
> connections between cases for live use
>
> It looks like if there were a jumper to turn off power on the
> cable two of these modules could be linked allowing easy set up
> of patches that span suitcases or monster cases with a simple one
> cable connection for live use.
>
> Is that a possibility
>
> Ross Stapf

The A-100CGK is already equipped with a 9 pin connector that can be used to
connect the A-100CGK with the planned adapter module so that a standard 9
pin sub-D cable can be used to connect power supply, Gate, CV1, CV2 and CV3
between A-100CGK and the adapter module. There are two jumpers on the
adapter board to connect Gate and CV1 to the corresponding lines of the
A-100 bus if desired. Details can be found on the A-100CGK info page on our
website. But so far nobody asked for the adapter module. This is why it's
not yet in production so far.

Best wishes
Dieter Doepfer