Hi Korhan,

> Florian, thanks for the eloboration on the 160-161-151, but I'm still not
> clear how I can use these, since they are basically gate sequencers and I
> have nothing to trigger in my setup (yet). Or am I missing something

Yes you are missing something ;-) The sentence of the day is: A gate is
nothing than a voltage too!

A gate is 5Volts. If you send this gate into the channel a mixer, and
turn down the "volume" of this channel the half, then the mixer will
output 2.5 Volts.

Ok, now you take the first four outputs of a A-161. Step by step each
output will have 5 Volts. Now every output is connected to the input of
the mixer. At the mixer you adjust each channel with another "volume".
Lets say, the first is half, the second is fully counterclockwise, the
third is at quarter position and the fourth at 3/4 position.
So the Mixer will output 2.5 Volts with the first step of the gate
sequence; 0 Volts with the second step; 1.25 Volts with the third step
and 3.75 Volts with the fourth step.

As you see the Mixer "converts" the gatesequence into a voltage sequence.

Florian