Hi Dieter,


I do have a professionally trained electrician friend who will do the
wiring for me. Connections for four busses is enough, any more and
the modules would propably be too much for the PSU.

I hope this message gets through, i have tried to respond to the
other guy for the whole day, but my post always ends up in an error.

In the email that i sent to you, i asked if you ship to finland and
how much does it costs. I still haven't gotten an answer, could you
answer it here Thomann doesn't have some of the modules i might
want, so it's kind of hard to order them from there.


Regards,
Kaali

--- In Doepfer_a100@yahoogroups.com , <hardware@...> wrote:
>
> > My plan is to make my own wooden cabinet for the synth and use the
> > power inlet and the powerunit itself for powering the rest of the
> > cabinet. Is this possible How many extra busses can be wired to
the
> > PSU if i won't go over the current(1200mA) limit Don't worry, i
got
> > a friend who is an pro-electrician who will do my wiring. Just
asking
> > these questions to be safe in my investment. If i can't wire more
> > busses and modules for the PSU in the Basic System, then the price
> > will not seem that great anymore as the frame might get useless.
> >
> >
> > Well, i'm off to bed now. Thanks for any and all answers.
> >
> > Regards,
> > Kaali
>
>
> Kaali,
>
> you can order the PSU and bus boards as spare parts. But wiring of
the PSU
> is allowed only for experts. As these works affects parts, pc
boards and
> cables that conduct mains voltage (230/115V) carrying out of these
works is
> allowed only for experts or authorized personnel who are familiar
with all
> valid safety rules. Laymen are not allowed to carry out these
works !
> Danger to Life !
>
> (I know it's boring to repeat this remark again and again but it's
> essential)
>
> For details please visit our website www.doepfer.com > FAQ > A-100
> Wiring
> the mains inlet, the power supply board and the bus boards
(English, for
> experts only)
>
> The PSU2 has flat connectors for up to 4 bus boards available. The
cables to
> connect the PSU2 with the bus boards are included with the bus
boards (3
> wires with flat connectors on both ends, length about 30cm). For
details
> please look at the A-100 accessories page of our website:
www.doepfer.com >
> PRODUCTS > A-100 > Accessories
>
> Best wishes
> Dieter Doepfer
>