> My plan is to make my own wooden cabinet for the synth and use the
> power inlet and the powerunit itself for powering the rest of the
> cabinet. Is this possible How many extra busses can be wired to the
> PSU if i won't go over the current(1200mA) limit Don't worry, i got
> a friend who is an pro-electrician who will do my wiring. Just asking
> these questions to be safe in my investment. If i can't wire more
> busses and modules for the PSU in the Basic System, then the price
> will not seem that great anymore as the frame might get useless.
>
>
> Well, i'm off to bed now. Thanks for any and all answers.
>
> Regards,
> Kaali

Kaali,

you can order the PSU and bus boards as spare parts. But wiring of the PSU
is allowed only for experts. As these works affects parts, pc boards and
cables that conduct mains voltage (230/115V) carrying out of these works is
allowed only for experts or authorized personnel who are familiar with all
valid safety rules. Laymen are not allowed to carry out these works !
Danger to Life !

(I know it's boring to repeat this remark again and again but it's
essential)

For details please visit our website www.doepfer.com > FAQ > A-100 > Wiring
the mains inlet, the power supply board and the bus boards (English, for
experts only)

The PSU2 has flat connectors for up to 4 bus boards available. The cables to
connect the PSU2 with the bus boards are included with the bus boards (3
wires with flat connectors on both ends, length about 30cm). For details
please look at the A-100 accessories page of our website: www.doepfer.com >
PRODUCTS > A-100 > Accessories

Best wishes
Dieter Doepfer