Hello,

I have 3 synths behind the PE: just need to connect a midi thru 1x4 to the PE midi out.
Each on a different midi channel and it works fine !

Fred

--- In kiwitechnics@yahoogroups.com , "cramseur2000" <cram@...> wrote:
>
> Alas, I was hoping for another way.
>
> <roups.com, Kiwitechnics <yahoogroups@> wrote:
> >
> > Each synth in the PE has a midi channel attached (menu level 2). These
> > can all be different. So for example set the MKS-80 to channel 1,
> > Cheetah to ch2 and the 8P to ch3 then set these same numbers into the PE
> > and daisy chain the midi using the midi through ports. The PE input also
> > has it's own midi ch number(menu level 3). This will enable the PC to
> > send to the PE on the one channel and control which ever synth you have
> > selected on the PE menu using the generic CC commands. Currently the PE
> > is not translating the midi note data only because I hadn't though of it
> > but this would be a simple mod if anyone thinks it is required.
> >
> > Murray
> >
> >
> >
> > On 5/08/2011 4:18 p.m., cramseur2000 wrote:
> > >
> > > Has anyone figures out an easy way to control multiple synths from one
> > > PE without connecting and disconnecting from each synth?
> > >
> > > I currently have an MKS-80, Cheetah MS6, and a JX-8p.
> > > I only have one PE.
> > >
> > > I need each synth to have access to my sequencer, and to the PE at the
> > > same time, so I don't have to continuously patch/re-patch.
> > >
> > > Thanks!
> > >
> > > Craig
> > >
> > >
> >
>