Got my TR-707 opened up. The power jack leads read 12v (on my multimeter)when the switch is off but they only read 2.15v when the switch is on. I don't know enough about electronics(yet) to follow the chain and find the faulty component. Anybody have any experience with this when I hit the switch the only thing that happens is the cartridge light blinks on for a second (sometimes) mostly red, sometimes green, then nothing. I would love to add this machine to my arsenal. Also, does the 707 have a dinsync out I ordered a 606 and a jx-3p and I'm thinking if it has one I can run midi into the 707 then control my 606 and sequencer on the jx-3p via the dinsync on the 707 and have them all linked to my other gear. I could use some feedback cause I've gone about as I can go without knowing what to do. I've spent the better part of a FEW weekends trying to figure this out. I don';t know how to use my multimeter that well. I can find voltages and check for continuity. That's about it. Starting to get pretty frustrating. Thank You for your responses.