Did you ever succeed in this endeavor

-m@

> -----Original Message-----
> From: oberheim@yahoogroups.com
> [mailto: oberheim@yahoogroups.com ] On Behalf Of skylab001
> Sent: Wednesday, February 15, 2006 3:42 PM
> To: oberheim@yahoogroups.com
> Subject: [oberheim] Matrix 6r system exclusive setup
>
> Now that I've got my 6R up and running, I would like to program my
> control freak for it so that I can control it with knobs. It has a
> matrix 1000 setup already but that doesn't work so far with the M6.
> Can somebody help me out with the sysex strings I need for parameter
> changes. So far I've got the general:
>
> F0H beginning of sysex
> 10H Oberehim code
> 06H For the M6R device ID
> <opcode>
> <data bytes>
> F7H
>
> But if somebody could fill me in with an example of say the VCF
> control string, I could probably figure the rest out. I need to figure
> out what the opcodes and the data bytes are for each parameter. I
> have found this text on the internet which I have been trying to
> reference but can't quite figure it out without seeing a full string
> or a couple full strings.:
>
>
>
>
> Statistics: 134 Bytes/Single Patch
> = 268 nybbles transmitted + 5 bytes Header + 1 byte Checksum
> + 1 byte EOX
> = 275 total transmitted bytes/Single Patch
>
>
> Byte Parameter # Bits Description
>
> 0 - 7 6 each Patch Name
> Each character is represented by the lower 6
> bits of it's ASCII
> representation.
>
> 8 48 2 Keyboard Mode
> 0 = Reassign
> 1 = Rotate
> 2 = Unison
> 3 = Reassign w/ Rob
>
> 9 00 6 DCO 1 Initial Frequency
> LSB = 1 Semitone
>
> 10 05 6 DCO 1 Initial Waveshape
> 0 = Sawtooth
> 31 = Triangle
>
> 11 03 6 DCO 1 Initial Pulse Width
>
> 12 07 2 DCO 1 Fixed Modulations
> Bit 0 = Lever 1
> Bit 1 = Vibrato
>
> 13 06 2 DCO 1 Waveform Enable
> Bit 0 = Pulse
> Bit 1 = Wave
>
> 14 10 6 DCO 2 Initial Frequency
> LSB = 1 Semitone
>
> 15 15 6 DCO 2 Initial Waveshape
> 0 = Sawtooth
> 31 = Triangle
>
> 16 13 6 DCO 2 Initial Pulse Width
>
> 17 17 2 DCO 2 Fixed Modulations
> Bit 0 = Lever 1
> Bit 1 = Vibrato
>
> 18 16 3 DCO 1 Waveform Enable
> Bit 0 = Pulse
> Bit 1 = Wave
> Bit 2 = Noise
>
> 19 12 6 (signed) DCO 2
> Detune
>
>
> Byte Parameter # Bits Description
>
> 20 20 6 Mix
>
> 21 08 2 DCO 1 Fixed Modulations
> Bit 0 = Portamento
> Bit 1 = Not used
>
> 22 09 1 DCO 1 Click
>
> 23 18 2 DCO 2 Fixed Modulations
> Bit 0 = Portamento
> Bit 1 = Keyboard Tracking Enable
>
> 24 19 1 DCO 2 Click
>
> 25 02 2 DCO Sync Mode
>
> 26 21 7 VCF Initial Frequency
> LSB = 1 Semitone
>
> 27 24 6 VCF Initial Resonance
>
> 28 25 2 VCF Fixed Modulations
> Bit 0 = Lever 1
> Bit 1 = Vibrato
>
> 29 26 2 VCF Keyboard Modulation
> Bit 0 = Portamento
> Bit 1 = Keyboard
>
> 30 30 6 VCF FM Initial Amount
>
> 31 27 6 VCA 1 (Exponential) Initial Amount
>
> 32 44 6 Portamento Initial Rate
>
> 33 46 2 Lag Mode
> 0 = Constant Speed
> 1 = Constant Time
> 2 = Exponential
> 3 = Exponential
>
> 34 47 1 Legato Portamento Enable
>
> 35 80 6 LFO 1 Initial Speed
>
> 36 86 2 LFO 1 Trigger
> 0 = No Trigger
> 1 = Single Trigger
> 2 = Multi Trigger
> 3 = External Trigger
>
> 37 87 1 LFO 1 Lag Enable
> 38 82 3 LFO 1 Waveshape (see Table 1)
> 39 83 5 LFO 1 Retrigger point
> 40 88 5 LFO 1 Sampled Source Number
> 41 84 6 LFO 1 Initial Amplitude
>
>
> this is only a partial list,
>
> anyways,
>
> Thanks
> Brian
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>