Hi I wasn't able to find a definitive answer fro your question, however I did find that the
software I am using will edit both the M1000 and the M6. The main difference in the SysEx
messages seems to be the device code. Every thing else looks the same.

James

--- In oberheim@yahoogroups.com , "balinttihamer" <quijote@e...> wrote:
> ok ,thanx for that links .. i will wait your answer about editors ,
> cheers
> Balint
>
>
> --- In oberheim@yahoogroups.com , james <rakker16mm@y...> wrote:
> > Hi Balint,
> > Unfortunatly I don't have specific knowlege to answear
> > your question.
> >
> > "i have download Matrixed for m 1000 ,
> > > do you know , can i
> > > use this program for m6 "
> >
> > Since you have the program there is no harm in trying
> > it out. You won't hurt any thing. I will consult with
> > my friend this weekend and see what else I can find
> > out.
> >
> > In the meantime I can tell you that while the M1000
> > and the M6 are veary similar as far as their
> > architechture goes, the the SysEx commands are just
> > slightly slightly different. I have read that the M6
> > can be used to program the M1000 but I am not sure if
> > using a patch editor designed for the M1000 will work
> > on the M6. The two URLS below will take you to a site
> > where you can examin the SysEx for the M6 and M1000.
> >
> > http://www.youngmonkey.ca/nose/audio_tech/synth/Oberheim-Matrix6R.html
> >
> > http://www.youngmonkey.ca/nose/audio_tech/synth/Oberheim-Matrix1000.html
> >
> > --- balinttihamer <quijote@e...> wrote:
> >
> > > i got a PC Athlon 2800 , and loth of hardware gear ,
> > > i have editors
> > > for my other syntis , but i like to have easy to use
> > > editor for M6 , i
> > > saw some ob 6000 on the net , that cost i think 50$
> > > , that looks like
> > > ok .... and i have download Matrixed for m 1000 ,
> > > do you know , can i
> > > use this program for m6
> > > my gear list :
> > > roland xv 5080 , jd 990 , s 760 , Doepfer ms 404 ,
> > > Virus C, Waldorf Xt
> > > ,yamaha An1x .... will buy a M6 next week ... and
> > > wish in near future
> > > some old analog gears ..junos , jupiters ,mks ...
> > > ;-)
> > > but im now fascinated with M6 , i was download some
> > > nice demo sounds ,
> > > and a price ;-)) i find it for 200 euros ....
> > > so i read abot combination of behringer controler
> > > with M6 , have you
> > > make a predet for M6
> > >
> > > cheers
> > > Balint
> > > www.goasia-project.com
> > >
> > >
> > >
> > > --- In oberheim@yahoogroups.com , james
> > > <rakker16mm@y...> wrote:
> > > > Hi,
> > > >
> > > > What is the best M6 editor depends on what else is
> > > in
> > > > your studio and what you plan on doing.
> > > >
> > > > What kind of computer and OS are you planning to
> > > use
> > > >
> > > > You might be able to pic up an old Mac or PC super
> > > > cheap and find some old editing software like Edit
> > > One
> > > > (my current set-up).
> > > >
> > > > I have seen some free stuff here and there from
> > > time
> > > > to time. There is even a Java based universal
> > > editor
> > > > if you are savvy enough to set it up and learn how
> > > it
> > > > works.
> > > >
> > > > Another point to consider is if you have other
> > > Synths
> > > > that you want to work with. You might want one
> > > program
> > > > that handles all of your Synths, but if you only
> > > want
> > > > to create patches for the M6 you probably want a
> > > > smaller less expensive program.
> > > >
> > > > At the moment I am collaborating on a project to
> > > build
> > > > a simple Cocoa based patch editor/librarian for
> > > the M6
> > > > to run on Mac 10.3 or later. I can't tell you when
> > > it
> > > > will be ready because we are doing this in our
> > > spare
> > > > time, but we are making progress. We hope to have
> > > the
> > > > first bits of it running this Sunday. I plan to
> > > make
> > > > it available for testing and evaluation in the
> > > future
> > > > if there is enough interest.
> > > >
> > > > James
> > > >
> > > > --- balinttihamer <balinttihamer@y...> wrote:
> > > >
> > > > > i saw some editors on web , so maybe someone can
> > > > > help me to find a
> > > > > best , to make a best choice ...i read loth
> > > about
> > > > > matrix 6 , and now i
> > > > > find one in good condition , i like analog gears
> > > ,
> > > > > but the user
> > > > > interface of M 6 is brrrrr.. so i can buy a
> > > > > behringer bcr controller ,
> > > > > maybe someone
> > > > > contolled a M6 with this controller , or maybe i
> > > > > must buy some better
> > > > > for m6 , so please inform me on
> > > > > contact@g... or visit
> > > > > my site www.goasia-project.com
> > > > >
> > > > > boom
> > > > > Balint
> > > > >
> > > > >
> > > > >
> > > > >
> > >
> > >
> > >
> > >