Congratulations!!!!

A former OBXa owner who gave his away..........

Charlie

On Feb 21, 2011, at 8:10 PM, FL_799 wrote:

> Just want to share a little restoration project.
>
> My obxa was getting really unstable after about 30 minutes of
> playing. Autotune would fail voice cards the whole thing was getting
> WAY out of whack. The cards were just not uniform sounding any
> longer no matter how much they were calibrated. Something had to be
> done.
>
> Over Friday night and Saturday morning, I recapped the PSU and the 7
> electrolytic caps on all 8 voice cards with Nicholson capacitors
> exactly as listed in the schematics i.e. 15uf/25v caps on the voice
> cards. Also replaced the 2 100uf caps on each of motherboards and
> few 6.8/35v tantalum caps. I bought 16 100k trim pots for the
> oscillators but they are too small to work so the originals stay
> until I find better (suggestions ).
>
> After recalibrating the cards, I have a solid 3 days putting the
> obxa through its paces and have several hours of sheer pleasure
> without a hitch. It's running and sounding great. I actually screwed
> down the lid and have not had to get under the hood so I'd say this
> mission was a success. Maybe I'll do the control boards in a few
> weeks and go all the way.
>
> So everything is just about done. Everything is functional, board
> level, new bushings installed, and it sounds great. Life is indeed
> good.
>
> James
>
>
>
>
>
>
>
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>