Each synth in the PE has a midi channel attached (menu level 2). These can all be different. So for example set the MKS-80 to channel 1, Cheetah to ch2 and the 8P to ch3 then set these same numbers into the PE and daisy chain the midi using the midi through ports. The PE input also has it's own midi ch number (menu level 3) . This will enable the PC to send to the PE on the one channel and control which ever synth you have selected on the PE menu using the generic CC commands. Currently the PE is not translating the midi note data only because I hadn't though of it but this would be a simple mod if anyone thinks it is required.

Murray

 

On 5/08/2011 4:18 p.m., cramseur2000 wrote:

 

Has anyone figures out an easy way to control multiple synths from one PE without connecting and disconnecting from each synth?

I currently have an MKS-80, Cheetah MS6, and a JX-8p.
I only have one PE.

I need each synth to have access to my sequencer, and to the PE at the same time, so I don't have to continuously patch/re-patch.

Thanks!

Craig