Thanks a lot for your answers !

--- In kiwitechnics@yahoogroups.com , "kiwitechnics" <yahoogroups@...> wrote:
>
> Hi from Kiwitechnics
>
> v2 will be a downloadable update with no hardware changes.
>
> While I am here I will give a progress update.
>
> All internal maths has been expanded to 32 bit calculations which has stopped over/underflow problems and made for smoother mods. Where possible all outputs use the full 12bit D>A resolution.
>
> Tone storage is now 256 tones which are arranged in 4 bank 'sets'.
>
> The new parameter layout and tone storage layout is finished. Tone parameters are largely finished and Global parameters are still in progress.
>
> An automatic update for exisiting tones to the new layout & storage system will run at the first power up. This takes about 5 seconds.
>
> MidiCC commands for every parameter
>
> Bend ranges have been changed from 2nd, 3rd & 5th to 3rd, 5th & octave
>
> Larger range Chorus & LFO speed ranges. Sense slider will change chorus speed when not in edit mode. Chorus fast speed is now much faster as I have fixed the hardware glitch that was happening. Sense slider A>D timing has been improved to reduce jitter and I will also look at a hardware improvement when I get time.
>
> Larger range ENVs and ENV shaping is still in progress. I have completely rewritten ENVs from scratch and these will work correctly in arp & seq (retriggered for each note and for play along in seq), mono, unison & chord (retrigger if lowest/highest note lifted or pressed depending on mode). This area is very complex and is taking time to get right.
>
> The new menu layout is largely finished and is next to be tested. The new layout can be found on my web site on the news page ( http://kiwitechnics.com/news.htm) .
>
> There is still a lot of work and this will take a little while. If desired I can release it in stages as I finish sections.
>
> Regards
> Murray
>
>
>
>
> --- In kiwitechnics@yahoogroups.com , Robert Stickles <rob.ocelot@> wrote:
> >
> > I'm not Murray, but V2 likely won't require any additional hardware. Even
> > if it does I'm sure there will be an inexpensive upgrade path. I wouldn't
> > worry about it.
> >
> > The only real downside to buying it now is that there are still a lot of
> > refinements and bugfixes in the current OS. I was mildly disappointed at
> > first but that's the price you pay for being an early adopter.
> >
> > On Mon, Jul 25, 2011 at 12:17 PM, poiskaill <poiskaill@> wrote:
> >
> > > **
> > >
> > >
> > > Hello, I want to buy it now, but I'm afraid if the V2 update needs more
> > > than sysex.
> > >
> > > No need to replace the current ship if i want the V2 1 2
> > >
> > > Thanks
> > >
> > >
> > >
> >
>