So I figured out my initial problems, but have a short question for
the pros.

Basically it was an MPC issue (needed to turn on the Midi Clock in
the main screen... for future reference to MPC4000 users, Midi Clock
on the 4K is armed at the sequence level, so you can turn midi clock
on and off depending on the need... a very good feature!).

Now then. I have my midi clock running into the analog sequencer, but
it isn't very rhythmic. I would like to have the MIDI clock run my
Analog Sequencer at 8 or 16th notes, but it seems to be on weird
divisions that don't quite fall into beats. Do I need to have the
clock divider in between the 190-MCVS and the Analog Sequencer to
make it rhythmic, or can the 190 accept Midi Beat clock I know that
module is cheap, so If I need to get it, it is not a big deal... but
it would be nice if I could just program the 190 down to proper timing.

Anyone have a fix here






IN RESPONSE TO:

Hey Guys.

This is my first post here. I was thankful to find such a resource on
the Doepfer site.

I borrowed an A100 off a friend a month ago, and quickly fell in love
with the potential of the unit. I am not a synth head by any stretch
of the imagination, more working with processed samples, but have
already found some incredible applications for this system to my
music. In the last couple of weeks I bought two A100 frames in order
to build a 'processing filter mixer' for live sets (using my MPC4000
as my main instrument, with multi outs being sent through dedicated
Doepfer filters for specific sounds/ranges�syncd via A-190 Midi Box
and A-155 Analog Sequencer)� This processing box sounds awesome, and
I think it will be a lot of fun to use in my live sets.

I have basically decided to build something similar to the short-
lived Sherman Filter-mixer, but with much more power behind it. 4ins,
4 outs, Morph filters, step sequenced with the Analog sequencer� It
is already sounding quite evil.

My current setup
(4) A-119s (Dedicated Analog Inputs from MPC outputs)
(4) ADSRs (for synth and filter applications)
190 Midi Sync Unit
155 Analog Sequncer
107 Morph Filter
106 Xtreme filters
(2) 121 Multimode Filters
108 VCF
102 VCF
+ the usual suspect synth modules (2VCOs 2LFOs Noise, Etc.) and a
couple 138 Mixers.

Up until now I have been using the Analog Sequencer to send CV pulses
to different filters, clocked via the MPC using CV gates, programming
a note on every 16th at the MPC�. I know there is a much better way
to to this, but I cant get the 190 to respond to Midi Clock. Is there
a specific Midi note/channel for Midi Sync operation or is there
perhaps a defect with my unit� (I normally have no problem just
setting my MPC to transmit Midi Clock on Channel 1, port 1, but for
some reason the 190 isn�t picking up this info� do I need to set the
preferences on this unit somewhere to accept Midi Clock Info ).
Ideally I would like to be able to use the 190 to send Midi Beat
Clock data info to the 155 Sequencer, while sending simultaneous note
information to the Oscillators, for use of my A-100s as both a Synth
and a Processing Mixer with a Sync�d clock on both uses, programming
midi tracks in advance on the mutable-in-live-play MPC.

Thanks in Advance, I am sure others expertise can help me out here.

Rob.


==
Sixtoo (Robert Squire)
Audio Boxcutter , Visual Butterknife.
Instrumental Hiphop Producer / Remixer
--
web: http://www.sixtoo.net
email: sixtoo@...
--
Vinyl Promos:
Robert Squire
5581 St. Urbain St.
Montreal, QC
H2T2X2
Canada.
==
Management: Gabe Hilfer, NYC. ( gabe@... )
--
http://www.ninjatune.net
http://www.bullyrecords.com
--





[Non-text portions of this message have been removed]