yes, doepfer has never ever sent spam to anyone!
bakis.





--- Dieter Doepfer < hardware@... > wrote:

> We definitely do not send unasked emails (you may
> ask the members of this
> group) ! Probably someone has a virus that tells you
> that we are the sender.
> But such emails are not from us !
>
> Best regards
> Dieter Doepfer
> Doepfer Musikelektronik GmbH
> Email address: hardware@...
> Web Site: www.doepfer.com
>
>
> > -----Ursprüngliche Nachricht-----
> > Von: Doepfer_a100@yahoogroups.com
> > [mailto: Doepfer_a100@yahoogroups.com ]Im Auftrag
> von David Marino
> > Gesendet: Donnerstag, 15. September 2005 02:35
> > An: Doepfer_a100@yahoogroups.com
> > Betreff: Re: 1 RE: bananalogue VCS
> >
> >
> > can every one frome doepfer stop e-mailing me!
> >
> > Bryan E Cornell < bcor@... > wrote:I wonder if
> you can get a
> > panel blank for this gap. My Doepfer portable
> case has two very
> > small blanks on the left side (they appear to be
> about 1hp each).
> > I'd contact Analogue Haven.
> >
> > Bryan
> >
> > >>> david.salter@... 09/14/05 3:06 AM >>>
> > Hi Seth,
> >
> > Attached is link to the picture (bit fuzzy, sorry)
> showing the VCS
> > mounted into a Doepfer G6.
> >
> > http://img1.yoxio.com/img/197630.jpg
> >
> > As you can see there is a gap of just under 1HP.
> Because I'd removed two
> > modules to install the VCS my natural assumption
> was that the VCS's
> > mounting holes were out. On closer inspection you
> should be able to make
> > out that the lower mounting rails on my G6 are
> slightly off.
> >
> > Sincere apologies for the scare but I can confirm
> (because I did try
> > moving the module to the upper level) that the VCS
> mounts fine.
> >
> > BTW a great module. Followed some suggestions from
> Ingo and the Serge
> > Gold Guide and have now got the VCS working as a
> VC LFO, VCF, VC
> > Envelope and VCO. More to experiment with.
> >
> > Many thanks
> >
> > David
> >
> > David Salter
> > Senior Project Manager
> > Reuters Ltd
> > Tel +44 20 7542 2402
> > Mob +44 7990562402
> > email david.salter@...
> > RM david.salter.reuters@...
> >
> >
> > -----Original Message-----
> > From: info@...
> [mailto: info@... ]
> > Sent: 12 September 2005 18:38
> > To: David Salter
> > Subject: RE: bananalogue VCS
> >
> > hi david,
> >
> > just wanted to write a quick note to ask you if
> you could please send me
> > a digital photo of what your modules looks like
> mounted im concerned
> > about the space you mention. we tested mounting
> the modules in a
> > doepfer super-case, but if there is a mounting
> hole desprepency i need
> > to take measures to fix that. thanks! ill write
> again later with some
> > more comments and suggestions for using the VCS
> module!
> >
> > best wishes!
> > seth nemec
> >
> >
> >
> > > Hi Seth,
> > >
> > > My module has arrived, many thanks.
> > >
> > > I want to give you some feedback first as I'll
> be posting something
> > > onto the Doepfer forum as well.
> > >
> > > Speed of service and communications have been
> excellent. I made my
> > > first enquiry at the end of July and received my
> module 6 weeks later.
> >
> > > So no complaints there.
> > >
> > > First impressions. Excellent packing containing
> a very nice looking
> > > module, ribbon cable (too short for my custom
> rack but long enough for
> >
> > > a G6), mounting screws (always nice to see) and
> a two page information
> >
> > > pack.
> > >
> > > I had to remove a couple of modules to try it
> out so it went into the
> > > bottom left corner of a Doepfer G6 rack. The
> info pack has a clear
> > > diagram to ensure that the ribbon goes
> correctly. Comment number 1;
> > > the mounting holes do not conform to either the
> Doepfer or Analogue
> > > Systems spec which means I have a gap either
> side of the module. Not a
> >
> > > big deal but does affect the appearance.
> > >
> > > The info pack has a labelled panel drawing (as
> per website) and the
> > > connection details. Comment 2; I would really
> have appreciated a
> > > manual of some kind. Although I've had my
> Doepfer Analogue Sys. System
> >
> > > for a while I have no experience with Serge kit
> and some starting
> > > suggestions would have been useful.
> > >
> > > Started off by injecting a ramp wave in and
> listening. Played with the
> >
> > > various controls and started getting some nice
> sync type tones. Added
> > > a single LFO to modulate each of the CV's and
> then both CV's (love the
> >
> > > pull for expo curve on these pots) again some
> really interesting tone.
> > >
> > > A hour later and I have not tried using it
> beyond this type of
> > > function, would appreciate some guidance, but a
> very happy man so far.
> > >
> > > With luck Bananalogue will produce more Serge
> based modules I do hope
> >
> > > so.
> > >
> > > Best wishes
> > >
> > > David
> > >
> > >
> > >
> > > David Salter
> > > Senior Project Manager
> > > Reuters Ltd
> > > Tel +44 20 7542 2402
> > > Mob +44 7990562402
> > > email david.salter@...
> > > RM david.salter.reuters@...
> > >
> > >
> > > -----Original Message-----
> > > From: info@...
> [mailto: info@... ]
> > > Sent: 01 September 2005 22:26
> > > To: list@...
> > > Subject: [spam] bananalogue list and news!
> > >
> > > hello!
> > >
> > > you are recieving this message because you have
> either ordered a
> > > bananalogue VCS module, or expressed interest in
> the past. i created
>

=== message truncated ===


Bakis Siros
Parallel Worlds / Polariton
Athens-Greece
1 group owner
http://www.shimarecords.co.uk
http://www.ward12.com



__________________________________
Yahoo! Mail - PC Magazine Editors' Choice 2005
http://mail.yahoo.com