hello bryan,

you can buy blank panels with 1 hp from doepfer,
just ckeck the price list and you will find them.

best wishes

ingo


--- In Doepfer_a100@yahoogroups.com , "Bryan E Cornell" <bcor@l...>
wrote:

> I wonder if you can get a panel blank for this gap. My Doepfer

portable case has two very small blanks on the left side (they appear
to be about 1hp each). I'd contact Analogue Haven.

>
> Bryan
>
> >>> david.salter@r... 09/14/05 3:06 AM >>>
> Hi Seth,
>
> Attached is link to the picture (bit fuzzy, sorry) showing the VCS
> mounted into a Doepfer G6.
>
> http://img1.yoxio.com/img/197630.jpg
>
> As you can see there is a gap of just under 1HP. Because I'd

removed two

> modules to install the VCS my natural assumption was that the VCS's
> mounting holes were out. On closer inspection you should be able to

make

> out that the lower mounting rails on my G6 are slightly off.
>
> Sincere apologies for the scare but I can confirm (because I did try
> moving the module to the upper level) that the VCS mounts fine.
>
> BTW a great module. Followed some suggestions from Ingo and the

Serge

> Gold Guide and have now got the VCS working as a VC LFO, VCF, VC
> Envelope and VCO. More to experiment with.
>
> Many thanks
>
> David
>
> David Salter
> Senior Project Manager
> Reuters Ltd
> Tel +44 20 7542 2402
> Mob +44 7990562402
> email david.salter@r...
> RM david.salter.reuters@r...
>
>
> -----Original Message-----
> From: info@b... [mailto:info@b...]
> Sent: 12 September 2005 18:38
> To: David Salter
> Subject: RE: bananalogue VCS
>
> hi david,
>
> just wanted to write a quick note to ask you if you could please

send me

> a digital photo of what your modules looks like mounted im

concerned

> about the space you mention. we tested mounting the modules in a
> doepfer super-case, but if there is a mounting hole desprepency i

need

> to take measures to fix that. thanks! ill write again later with

some

> more comments and suggestions for using the VCS module!
>
> best wishes!
> seth nemec
>
>
>
> > Hi Seth,
> >
> > My module has arrived, many thanks.
> >
> > I want to give you some feedback first as I'll be posting

something

> > onto the Doepfer forum as well.
> >
> > Speed of service and communications have been excellent. I made

my

> > first enquiry at the end of July and received my module 6 weeks

later.

>
> > So no complaints there.
> >
> > First impressions. Excellent packing containing a very nice

looking

> > module, ribbon cable (too short for my custom rack but long

enough for

>
> > a G6), mounting screws (always nice to see) and a two page

information

>
> > pack.
> >
> > I had to remove a couple of modules to try it out so it went into

the

> > bottom left corner of a Doepfer G6 rack. The info pack has a

clear

> > diagram to ensure that the ribbon goes correctly. Comment number

1;

> > the mounting holes do not conform to either the Doepfer or

Analogue

> > Systems spec which means I have a gap either side of the module.

Not a

>
> > big deal but does affect the appearance.
> >
> > The info pack has a labelled panel drawing (as per website) and

the

> > connection details. Comment 2; I would really have appreciated a
> > manual of some kind. Although I've had my Doepfer Analogue Sys.

System

>
> > for a while I have no experience with Serge kit and some starting
> > suggestions would have been useful.
> >
> > Started off by injecting a ramp wave in and listening. Played

with the

>
> > various controls and started getting some nice sync type tones.

Added

> > a single LFO to modulate each of the CV's and then both CV's

(love the

>
> > pull for expo curve on these pots) again some really interesting

tone.

> >
> > A hour later and I have not tried using it beyond this type of
> > function, would appreciate some guidance, but a very happy man so

far.

> >
> > With luck Bananalogue will produce more Serge based modules I do

hope

>
> > so.
> >
> > Best wishes
> >
> > David
> >
> >
> >
> > David Salter
> > Senior Project Manager
> > Reuters Ltd
> > Tel +44 20 7542 2402
> > Mob +44 7990562402
> > email david.salter@r...
> > RM david.salter.reuters@r...
> >
> >
> > -----Original Message-----
> > From: info@b... [mailto:info@b...]
> > Sent: 01 September 2005 22:26
> > To: list@b...
> > Subject: [spam] bananalogue list and news!
> >
> > hello!
> >
> > you are recieving this message because you have either ordered a
> > bananalogue VCS module, or expressed interest in the past. i

created

> > the list as an efficient means to send genreal news updates. if

you

> > would like to be removed from the list, or would like to

subscribe at

> > a different email address, please email me: info@b...
> >
> > now the first news update!
> >
> > VCS modules are shipping as we test and pack them. some of you

should

>
> > find your module in the mail this week or next.
> >
> > we will also be taking orders for the second run of doepfer-sized
> > modules in the very near future. if you are on the waiting list,

you

> > will be contacted about payment before we open up the ordering

process

>
> > to the general public.
> >
> > also, the VCS will be made availible in a limited number of frac-

rack

> > modules sometime in september. i will send out another message

to the

>
> > list when they are ready.
> >
> > thats it for now - as always, please email me if you have any
> > questions or concerns. thanks!
> >
> > seth nemec
> > info@b...
> >
> > www.bananalogue.com
> >
> >
> >
> >
> >
> > -----------------------------------------------------------------
> > Visit our Internet site at http://www.reuters.com
> >
> > To find out more about Reuters Products and Services visit
> > http://www.reuters.com/productinfo
> >
> > Any views expressed in this message are those of the individual
> > sender, except where the sender specifically states them to be

the

> > views of Reuters Ltd.
> >
> >
> >
>
>
>
>
>
> -----------------------------------------------------------------
> Visit our Internet site at http://www.reuters.com
>
> To find out more about Reuters Products and Services visit

http://www.reuters.com/productinfo

>
> Any views expressed in this message are those of the individual
> sender, except where the sender specifically states them to be
> the views of Reuters Ltd.
>
>
>
> SPONSORED LINKS
> A100 Modular system Synthesizer Electronic payment Electronic test

equipment Guitar synthesizer

> YAHOO! GROUPS LINKS
>
> Visit your group "Doepfer_a100" on the web.
> To unsubscribe from this group, send an email to:
> Doepfer_a100-unsubscribe@yahoogroups.com
> Your use of Yahoo! Groups is subject to the Yahoo! Terms of

Service.