Hi sfrules

> I have a MicroMoog synth I want to use to control my
> Doepfer. The Micro uses Switch-Triggering for GATE. If I (now) understand
> correctly, that means no voltage but short to ground when a key is
> pressed. I need to trigger the envelopes...
>
> I have tried the A-165 Trigger Modifier. It does nothing. It does not
> detect a falling edge - or rising edge for that matter.

There is no module which will help you here.


A quick idea: You might modify a trigger inverter module:
- Connect the base of Q1 with 470k resistor to +12 Volt
- Replace R1 by 10k (perhaps it can remain at 47k)
The 12V on Input create a low on the Inv Out. If the switched trigger
closes the connection to ground on the input it is like a low on Input
and the Inv Out will raise to high.

No guarantee at all....

Florian