Hi

I think there is no "wrong" or "right" range. The P6 is an offset, which
can be set arbitrarily.

I assume there is a standard setting by the production at Doepfer, but
if you have bought the VCOs from any other person but a official
distributor he might have changed those settings.

Florian

analog1k wrote:

> Thanks for that Florian.
>
> However I think my range is still off...
>
> This what my VCO's are now tuned to:
> 0 = note C3
> -1 = note C2
> -2 = note C1
>
> +1 = note C4
> +2 = note C5
>
> according the a110 adjustment procedure that
> the above is wrong, it should be:
>
> -2 = note C3
> -1 = note C2
> 0 = note C1
> +1 = note C
> +2 = note c
>
> Which range is right, mine or the a110 tech notes
>
> Cheers.
>
>
>
> --- In Doepfer_a100@yahoogroups.com , Florian Anwander
> <Florian.Anwander@c...> wrote:
>
>>Hi
>>
>><snipped>
>>
>>>>The full set-up procedure is in the A-110 Service Manual, which
>
> is
>
>>>>available at the Doepfer website (there's a link on the A-110
>
> page).
>
>
>>Then you heave to bring it to a shop, who gives service for Doepfer.
>>
>>Best regards, Florian
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

--
Florian Anwander |ConSol
Tel. +49(89)45841-133 |Consulting&Solutions Software GmbH
Fax +49(89)45841-111 |Franziskanerstr. 38, D-81669 München
email: florian.anwander@... | http://www.consol.de