I just have tried to insert the plug only half the way: The A100 CV
as well as the pitch pot work at the same time. Thanks a lot!
Regards, Ingo

--- In Doepfer_a100@yahoogroups.com , Florian Anwander
<Florian.Anwander@c...> wrote:

> Hi
>
> > I either find a Boss Phase(!) Shifter PS-10 or Pitch

shifters PS-3 /

> > PS-5 in Google. Never heard from a RPS 10
> Whoops, must have overlooked a pile of links in Google....
>
> >> pitch. The input seems to be normalled to the pitch pot since

it

> >> does't work as soon as the 'kbd controll' jack is in use.

However, the

> >> result is: neither the pitch pot works nor can I controll the

device

> >> with any CV from my A100.
> Try to find out what voltage is sent by the pitch pot. You might

try to

> insert a cable not completely, so the tip of the jack has contact

to the

> connector inside the socket but the normalization switch is not

touched

> yet.
> The easy way would be to open it and measure with a voltmeter at

the

> center pin of the pot against 0 Volt.
>
> Florian