I'll be interested to hear an answer to this one. I can't think how this
can be done without more modules -- you need something counting to 24. Of
course the new A151 has a switch allowing you to use it as a 1:3. With the
old A151, in this configuration it seems like something that requires
another sequencer or sequential switch -- a trigger output on step 8 of
sequencer 1 clocks the second sequencer, which resets after 3 steps, multing
off the reset signal to the A151's reset input. I don't know, maybe I'm
full of sh_t on this. Other takers

--Chuck

-----Original Message-----
From: Doepfer_a100@yahoogroups.com [mailto: Doepfer_a100@yahoogroups.com ] On
Behalf Of trebcavxx
Sent: Friday, April 15, 2005 2:56 PM
To: Doepfer_a100@yahoogroups.com
Subject: 1 Doepfer A151



I've got a question about the Doepher A151 Sequential switch. Using the
switch in the fashion of inputting 3 CV feeds in, and taking an output
from the I/O socket, I'd need to input a reset signal into the reset
socket to cancel the 4th switching on each pass. Does anyone know where
I'd get the pulse from to do this
I'm feeding in three CVs from three Analogue Sol sequencers into 1,2
and 3, then taking the output from the I/O socket to my quantiser, and
then on to the CV input of a VCO. The switching pulse for the A151 is
coming from the 1:8 output of my master clock. The 1:1 output goes to
the three sequencer's CLOCK inputs, (and also to the TRIG of an
envelope generater), giving me the full 8 channels on a sequencer,
which then switches to the next sequencer and so on, so we have in
effect one 24 channel sequencer, but the resetting of the A151 is
giving me a problem.
Can anyone help please









Yahoo! Groups Links