Great idea! I'm going to try that. thanks!

Paul





_____

From: Tim Stinchcombe [mailto: timothy@... ]
Sent: Friday, March 11, 2005 2:41 PM
To: Doepfer_a100@yahoogroups.com
Subject: 1 Re: 16 step on 155 adapter




Hi Paul,

This should be quite easy to do: the divided-down clock signal is
actually already available in the A-155, as an unused pin (on the
CD4024 on the 'controller board'), so you don't need to replicate the
A-160; then you'd just need to replicate the A-150, which could be
done with a single chip (plus maybe a few diodes and things if you
wanted to know which half of the sixteen it was in). The older 150's
used the CD4053 (two in fact, but you could make do with just 1),
which _are_ cheap; the newer 150's use DG409's which are much more
expensive (perhaps maybe ten times so!), but I'm not familar with
them (i.e. I don't have a newer 150).

A little more thought would probably determine whether it was
possible to leave the whole lot permanently wired in, so that you
wouldn't need to switch it at all, just hook up to two (new) sockets
when you wanted to go to 16 steps. Eminently do-able!

Tim


--- In Doepfer_a100@yahoogroups.com , "Paul Wagorn" <pwagorn@p...>
wrote:

>
> It seems to me that being able to switch the 155 over to a 16 step

in stead

> of dual 8 is fairly straightforward using 2 other modules.
>
> Rather than have to rig this up every time one would want to use 16

steps, I

> was thinking that it may be a very simple thing to rig up an

adapter with a

> couple of logic IC's for less than $1 to duplicate this

functionality.

>
> This 'adapter' would & would save using a couple of modules to

perform this

> simple task, and would make it quicker to switch between 8 & 16

steps. Of

> course this could all me mounted in the sequencer, but a little

adapter box

> would do just as wel (perhaps there will be a version of the 155

with a

> switch like this built in one day )
>
> Has anyone tried to make anything like this Or does everyone just

use (or

> buy id they don't already have) the extra modules & leave them

dedicated to

> this purpose
>
> I was thinking of making something like this, but would love to

hear from

> anyone else who has tied the same.
>
> Paul

Yahoo! Groups Sponsor



ADVERTISEMENT

< http://us.ard.yahoo.com/SIG=1291b1krj/M=298184.6018725.7038619.3001176/D=gr
plch/S=1705032144:HM/EXP=1110667263/A=2593423/R=0/SIG=11el9gslf/*http:/www.n
etflix.com/Default mqso=60190075> click here



< http://us.adserver.yahoo.com/l M=298184.6018725.7038619.3001176/D=grplch/S=
:HM/A=2593423/rand=929835940>



_____

Yahoo! Groups Links

* To visit your group on the web, go to:
http://groups.yahoo.com/group/Doepfer_a100/

* To unsubscribe from this group, send an email to:
Doepfer_a100-unsubscribe@yahoogroups.com
<mailto: Doepfer_a100-unsubscribe@yahoogroups.com subject=Unsubscribe>

* Your use of Yahoo! Groups is subject to the Yahoo!
< http://docs.yahoo.com/info/terms/ > Terms of Service.



[Non-text portions of this message have been removed]