hello tim,
great!
many thanks for the useful info!
bakis.




--- Tim Stinchcombe
< timothy@... > wrote:

>
> Hi Bakis,
>
> > so, the a185 cannot be used as a simple cv buffer
> > module(like the AS rs230)
>
> Yes it can!
>
> > does the a185 has to always buffer and "write"
> from
> > it's input to the buss board, or read the signals
> of
> > the buss board and buffer them to it's outputs
> > can't anyone input a cv and/or gate singal to the
> > a185's inputs and get this signal buffered from
> the
> > a185's outputs (without these signals interfering
> with
> > the bussboard)
> > i mean, does the a185 has to be connected to the
> > bussboard in one way or another
>
> The central pin of the jumper is the bus board
> connection: with the
> jumper in the factory setting ('write' mode), the
> output of the
> buffer is connected to the bus board; with the
> jumper in the other
> position ('read' mode), the bus board is connected
> to the input of
> the buffer. So removing the jumper completely means
> the bus board is
> just not connected at all, and so the module then
> acts as a
> standalone buffer module.
>
> Tim
>
>
>
>

=====
Bakis Siros
Parallel Worlds / Polariton
Athens-Greece
1 group owner
http://www.shimarecords.co.uk
http://www.ward12.com



__________________________________
Do you Yahoo!
Yahoo! Mail - 250MB free storage. Do more. Manage less.
http://info.mail.yahoo.com/mail_250