--- Dieter Doepfer < hardware@... > wrote:

> From: "Dieter Doepfer" < hardware@... >
> To: "Bakis Sirros" < synth_freak_2000@... >
> Subject: AW: 1 A-156 problem
> Date: Thu, 25 Nov 2004 14:41:09 +0100
>
> > hello,
> > as far as i remember, (i haven't used my a156 for
> a
> > long time), the a156 does NOT pass the triggers
> that
> > it receives from it's trigger inputs to its
> trigger
> > outputs. the a156 output triggers ONLY when the
> incoming cv changes.
> > so, if you send to the a156 a constant cv, it will
> > output NO triggers at all, no matter if you send
> triggers to it's inputs.
> > send to the a156 a changing cv signal(for example
> from
> > an lfo) and you'll see that it generates triggers
> by
> > itself. if you send to the a156 a trigger signal
> to
> > it;s trigger inputs and a changing cv signal(for
> > example an lfo sine) to it's cv inputs, then the
> a156
> > will output triggers in sync to the input
> triggers,
> > only because at each input trigger that the a156
> > receives, it also receives a changing cv at the
> same times.
> > the a156 trigger inputs are there only for
> "telling"
> > the a156 WHEN to quantize the incoming voltage.
> > so, depending in the incoming cv to be quantized,
> > sometimes the a156 will output triggers at the
> same
> > time as the triggers it receives in it's inputs
> and
> > sometimes not.
> > please, dieter, correct me if i'm wrong.
>
> no, you described the function exactly. If the
> trigger input signal has to
> be used for other functions too a multiple should be
> used to split the
> trigger input signal. If the trigger and trigger
> output signals should be
> ORed (i.e. OR-wired) or ANDed (i.e. AND-wired) an
> A-166 Logic Module can be
> used.
>
> Best wishes
> Dieter Doepfer
>
>

=====
Bakis Siros
Parallel Worlds / Polariton
Athens-Greece
1 group owner
http://www.shimarecords.co.uk
http://www.ward12.com



__________________________________
Do you Yahoo!
The all-new My Yahoo! - Get yours free!
http://my.yahoo.com