hello bakis,

it's not patience, it's passion ;-)

best wishes

ingo



--- In Doepfer_a100@yahoogroups.com , Bakis Sirros
<synth_freak_2000@y...> wrote:

> hello ingo,
> many thanks for posting all these detailed sound
> examples! it seems that you have a lot of patience.
> bakis.
>
>
>
>
> --- selfoscillate <synaptic_music@y...> wrote:
>
> >
> > hello list,
> >
> > here are some of the requested sound examples.
> > all files are 110 bpm and they should also
> > work as loops.
> >
> > for all the examples the same sequence was used.
> > the pulse wave of an a111 vco is the audio source.
> > the end of the signal chain is an a131 vca,
> > controlled
> > by an a140 adsr. the different patches had different
> > output volumes. therefore the output level of the
> > vca
> > was re-adjusted on each patch.
> >
> > this is the a111 pulsewave output:
> >
> > http://www.selfoscillate.de/a100files/osc+vca.mp3
> >
> >
> > then the modules in question were patched between
> > the vco and the vca.
> >
> >
> > a101-3 vactrol phaser, modulated by an a147 lfo
> > (triangle).
> > example 1 is a 6-stage patch with simple lfo
> > modulation.
> > example 2 is the same as example 1, but in 12-stage
> > mode.
> > example 3 is a 6-stage-patch with a more complex lfo
> > modulation (vco pitch cv modulates the lfo
> > frequency).
> > example 4 is the same as example 3, but in 12-stage
> > mode.
> > example 5 is the same as example 4, but the lfo
> > modulation
> > is inverted for the vactrols 7 - 12.
> >
> >
> http://www.selfoscillate.de/a100files/a101-3-take-1.mp3
> >
> http://www.selfoscillate.de/a100files/a101-3-take-2.mp3
> >
> http://www.selfoscillate.de/a100files/a101-3-take-3.mp3
> >
> http://www.selfoscillate.de/a100files/a101-3-take-4.mp3
> >
> http://www.selfoscillate.de/a100files/a101-3-take-5.mp3
> >
> >
> >
> > a102 diode filter, with different settings for level
> > and
> > resonance, cutoff modulated by an a145 lfo
> > (triangle).
> > on the examples 2, 3 and 4 the filter cutoff was
> > additionally controlled by the vco pitch cv
> > (keytracking):
> >
> >
> http://www.selfoscillate.de/a100files/a102-take-1.mp3
> >
> http://www.selfoscillate.de/a100files/a102-take-2.mp3
> >
> http://www.selfoscillate.de/a100files/a102-take-3.mp3
> >
> http://www.selfoscillate.de/a100files/a102-take-4.mp3
> >
> >
> >
> > a107 morphing filter in different modes:
> > example 1 is filter mode 04 (12db low + 6db high),
> > with
> > keytracking and lfo modulation (triangle) on the
> > cutoff,
> > resonance is close to self-oscillation.
> > example 2 is the same as example 1, but in filter
> > mode 21,
> > which is a 6db highpass.
> > example 3 is the same as example 1, but in filter
> > mode 16
> > (lowpass + notch 2) and without lfo modulation.
> > example 4 is a morph between 7 filtermodes, going
> > from
> > mode 26 to 32 and back, without any other modulation
> > (fixed cutoff), but with maximum input level and
> > maximum
> > resonance.
> >
> >
> http://www.selfoscillate.de/a100files/a107-take-1.mp3
> >
> http://www.selfoscillate.de/a100files/a107-take-2.mp3
> >
> http://www.selfoscillate.de/a100files/a107-take-3.mp3
> >
> http://www.selfoscillate.de/a100files/a107-take-4.mp3
> >
> >
> >
> > a108 48db lowpass with a101-3 vactrol phaser patched
> > into the a108 feedback loop. keytracking is used on
> > both a108
> > and a101-3. the 24db lowpass output of the a108 is
> > fed into
> > the a101-3 audio input. the a101-3 output for stage
> > 4 is
> > fed back into the a108 resonance input jack. the 48
> > db
> > lowpass output is used as audio output for the final
> > vca.
> > during recording the polarizer 1 on the a101-3 was
> > turned
> > from "fully counter clockwise" (negative feedback)
> > to
> > "fully clockwise" (positive feedback).
> >
> >
> http://www.selfoscillate.de/a100files/a108-a101-3-take-1.mp3
> >
> >
> >
> > a133 polarizer, used to modulate the vco waveform.
> > the vco pulsewave is fed into the audio input of the
> > a133.
> > the vco sinewave is fed into the cv input of the
> > polarizer.
> > during recording the a133 cv attenuator was turned
> > from
> > "fully counter clockwise" to "fully clockwise".
> >
> >
> http://www.selfoscillate.de/a100files/a133-take-1.mp3
> >
> >
> >
> > a196 pll, patched between vco and vca, with the
> > following settings:
> > offs=5, range=mid, type=2, lowpass freq=2
> >
> >
> http://www.selfoscillate.de/a100files/a196-take-1.mp3
> >
> >
> >
> > ok, thats all for now. i don't think that detailed
> > parameter settings
> > are really necessary for these examples. anyway, if
> > somebody is
> > interested in more details, please contact me via
> > email.
> >
> > best wishes
> >
> > ingo
> >
> >
> >
> >
> >
>
>
> =====
> Bakis Siros
> Parallel Worlds / Polariton
> Athens-Greece
> 1 group owner
> http://www.shimarecords.co.uk
> http://www.ward12.com
>
>
>
> _______________________________
> Do you Yahoo!
> Win 1 of 4,000 free domain names from Yahoo! Enter now.
> http://promotions.yahoo.com/goldrush