--- In
Doepfer_a100@yahoogroups.com
, Bakis Sirros
<synth_freak_2000@y...> wrote:
> dieter says:
> "All the new modules are in production at our
> manufacturer (A-107, A-133, A-149-1, A-167, A-172,
> A-196). So all we can do is to wait for the modules.
> For the A-107 the A-107 the display windows are still
> missing (I'm not sure if I already mentioned that) but
> we will get them next week and forward them to the
> manufacturer immediately.
>
> During the last time we did a lot of tests and
> measurements with the vactrol samples and are about to
> develop the first module based on vactrols. It will be
> a Steiner filter but made with vactrols and the
> possibility of notch filter too (not available for the
> original filter design). We also try to add a
> resonance/output level compensation as in the original
> filter design the audio level increased for higher
> resonance settings considerably. We try to add a
> control that allows to compensate this behaviour
> (probably it will we even possible that the audio
> level decreases for higher resonance settings, the
> behaviour will depend upon the setting of the new
> res/level control). In the PSpice simulation
> everything has been OK and now we are about to develop
> the real circuit.
> We are also about to develop the prototypes for the
> A-149-2 (8 digital random outputs / addendum to
> A-149-1) and - believe it or not - a VU module. The
> first preliminary information without obligation will
> be available soon on our web site (maybe still this
> weekend, but I'm not sure). The hidden links will be
> A1011.htm (vactrol filter), a1492.htm and a197.htm
> (VU). As we have problems with the numbers for new
> modules probably all vactrol modules will be A-101-x
> (x = 1,2,3 ...). The A-101-1 is the number for the
> planned vactrol Steiner filter, but we even think
> about vactrol based phasers, low pass gates (like
> Buchla) and many more. A-197 is the provisional number
> for the VU but maybe the module will get another
> number. I think for the A-149-2 and the VU we will
> collect orders before we start the production (at
> least ~ 50). The vactrol filter will be manufactured
> in any case - provided that no problems occur.
>
> What else: finishing the A-137 Wave Multiplier, the
> A-154 Sequencer Controller, the MIDI Ribbon
> controller, the Hammond keyboard and early next year
> the TKB and a normal CV/Gate keyboard for A-100. And
> to add the MP3 audio samples for A-196 and A-137. "
a short question regarding the steiner-filter:
will this filter have individual inputs for
the different filtertypes and the additional
allpass output (like the one from cynthia)
this would be great, especially the individual inputs.
oh and i will order the a149-2 and a197 for sure, so
there are just 49 customers left ;)
best wishes
ingo