At one point Doepfer was offering mini-to-phone (1/8" to 1/4")
patch cables, for free if I remember correctly.

I use a stamdard 1/4" patch bay to connect audio and CV between my
A100 and various 19" rack modules. It works very well. There's a
picture of the setup in the photos section.

If you don't know how to solder, or are too lazy, you can always buy
the cables with the correct plug on each end, or use adapters.

I still think that Doepfer could make money by selling a 19" rackmount
patchbay with minijacks on the front. No one else produces such a
thing, but it would be great with an A100 and other small format
modular systems. I don't think this will happen, though.

Joe

--- In Doepfer_a100@yahoogroups.com , Quantum Productions
<quantumproductions@p...> wrote:

> Hi Dustin
>
> this is a good point
> I have found the following solution for my own setup: I use a normal

2 x 24

> jack/jack format patchbay (such as the neutrik, fostex or behringer

version)

> and I made quite a couple of 3,5 mm to jack cords
> because I also use a minimoog voyager (lots of ins/outs) and the

VX351

> expander, all with normal format jacks and this enables me to

interface them

> directly (I have connected the moog ins/outs with multicables to the
> backside of a part of the patchbay, enabling me to make a direct

connection

> to all inputs/outputs on the doepfer system and vice versa
> this is very workable solution, only thing is that you are good at

soldering

> and use quality materials
> I think it would make sense if doepfer asked her manufacturer to

produce

> molded 3,5 mm <-> jack cords in different sizes and colours....
>
> there is another solution, but this is not available yet
> I am working on the design and build of a matrix/patch module for

the

> doepfer and this should enable you to interface with external gear

ánd patch

> several doepfer inputs/outputs at once
> as soon as I have this idea worked out I will post it to the list as
> promised a couple of days ago
>
> eric
>
>
> ----- Original Message -----
> From: "dustin_l_mosley" <dustinmosley@h...>
> To: < Doepfer_a100@yahoogroups.com >
> Sent: Thursday, June 12, 2003 10:29 PM
> Subject: 1 3.5mm patchbay
>
>
> > Hi,
> > Does anyone know of a company that makes a patchbay with
> > mono 3.5mm connections on the front to help integrate other
> > pieces of gear to your a-100 I have a few A-181s (the mult with
> > the adapter from 1/4") but it's slow and a pain to use with gear
> > with connections on the back. Any ideas or solutions
> > Thanks
> > Dustin
> >
> >
> >
> > To unsubscribe from this group, send an email to:
> > doepfer_a100-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to

http://docs.yahoo.com/info/terms/

> >
> >
> >