hey joe,
i want one like yours,too:-)
bakis.


--- Joe Buechler < buechlerjoe@... > wrote:

> I'd like it to be a moving coil analog meter, and
> illuminated. I'd
> probably use it most for monitoring control
> voltages, so I'd like it
> to be DC-coupled, linear, with a positive/negative
> display. It would
> be ideal if it could also be switched to an audio
> scale, AC-coupled
> exponential with a positive-only DB scale.
>
> As far as having two, maybe it could be a dual meter
> module.
>
> Joe
>
> --- In Doepfer_a100@yahoogroups.com , "klamb000"
> <lamb@c...> wrote:
> > Me too. I'd like that's backlit. I think one
> shoud have at least
> 2.
> >
> > Regards,
> > Kevin
> >
> > --- In Doepfer_a100@yahoogroups.com ,
> "selfoscillate"
> > <synaptic_music@y...> wrote:
> > >
> > > hello bakis,
> > >
> > > yes, you are right ;-)
> > > i would also prefer a doepfer-meter.
> > >
> > > best wishes
> > >
> > > self oscillate
> > >
> > > p.s. by the way, how do you like the
> technosaurus
> > > does it really sound that good compared to
> other modulars
> > > i never gave it a try because i find it is
> too expensive.
> > >
> > >
> > >
> > > --- In Doepfer_a100@yahoogroups.com , Bakis
> Sirros
> > > <synth_freak_2000@y...> wrote:
> > > > hi self-osc,
> > > > no!.the doepfer A1 vu-meter should be the
> best
> > > > choise ;-)
> > > > bakis.
> > > >
> > > >
> > > > --- selfoscillate <synaptic_music@y...> wrote:
> > > > >
> > > > > the analogue solutions vu-meter isn't
> available
> > > > > anymore.
> > > > > the analogue systems vu-meter should be a
> better
> > > > > choice.
> > > > >
> > > > > best wishes
> > > > >
> > > > > self oscillate
> > > > >
> > > > >
> > > > > --- In Doepfer_a100@yahoogroups.com ,
> "unknown freak"
> > > > > <cgraef@n...>
> > > > > wrote:
> > > > > > Have you considered getting Analogue
> Solutions' VU
> > > > > module It
> > > > > would blend
> > > > > > right into your rack.
> > > > > >
> > > > > > > -----Original Message-----
> > > > > > > From: Bakis Sirros
> > > > > 2
> > > > > > > Sent: Sunday, May 04, 2003 4:56 PM
> > > > > > > To: Doepfer_a100@yahoogroups.com
> > > > > > > Subject: Re: 1 Re: A-136 CV
> > > > > question
> > > > > > >
> > > > > > >
> > > > > > > hi list,
> > > > > > > isn't it sad to try to figure out what's
> going
> > > > > on
> > > > > > > inside the a100 by watching the a170 or
> a185 or
> > > > > > > a175...little leds (btw,i do the
> > > > > same...).that's why
> > > > > > > i have always proposed that we need a
> vu-meter
> > > > > > > module.so,if you think you need one(like
> i
> > > > > do)vote in
> > > > > > > the vu-meter poll....
> > > > > > > bakis.
> > > > > > >
> > > > > > >
> > > > > > > --- Joe Buechler <buechlerjoe@t...>
> wrote:
> > > > > > > > Timothy, you're not the only one who
> needs to
> > > > > > > > correct himself five
> > > > > > > > minutes after posting :-)
> > > > > > > >
> > > > > > > > That's how long it took me, adjusting
> the
> > > > > voltage
> > > > > > > > from an A176 CV
> > > > > > > > Source, and watching the LEDs on an
> A170, to
> > > > > > > > convince myself that the
> > > > > > > > A136 does indeed process the A, +A,
> and -A
> > > > > paths
> > > > > > > > independently, and
> > > > > > > > then sums the result. My A132
> suggestion was
> > > > > all
> > > > > > > > wet.
> > > > > > > >
> > > > > > > > If nothing else, I've learned a little
> bit
> > > > > more
> > > > > > > > about the A136 today.
> > > > > > > >
> > > > > > > > Joe
> > > > > > > >
> > > > > > > > --- In Doepfer_a100@yahoogroups.com ,
> "Joe
> > > > > Buechler"
> > > > > > > > <buechlerjoe@t...>
> > > > > > > > wrote:
> > > > > > > > > Timothy, the A136 User's manual says
> that
> > > > > the
> > > > > > > > signal is split into
> > > > > > > > > three parts, but no signal flow
> diagram is
> > > > > > > > provided. (This is only
> > > > > > > > > the least of the problems with the
> A136
> > > > > > > > documentation). The
> > > > > > > > > signal diagram on the module front
> panel
> > > > > suggests
> > > > > > > > that the "A" gain
> > > > > > > > > is applied BEFORE the signal is fed
> to the
> > > > > > > > positive and negative
> > > > > > > > > clipping circuits. That's why I made
> the
> > > > > > > > suggestion that I did.
> > > > > > > > >
> > > > > > > > > I suppose I could spend some time
> > > > > experimenting to
> > > > > > > > determine the
> > > > > > > > > actual signal path, but it's a
> tedious
> > > > > business
> > > > > > > > without a scope. I
> > > > > > > > > wish bakis would nudge Dieter to
> describe
> > > > > the A136
> > > > > > > > signal path, and
> > > > > > > > > correct all the errors in the User's
> Guide
> > > > > while
> > > > > > > > he's at it.
> > > > > > > > >
> > > > > > > > > Joe
> > > > > > > > >
> > > > > > > > > --- In Doepfer_a100@yahoogroups.com ,
> "Tim
> > > > > > > > Stinchcombe"
> > > > > > > > <timothy@t...>
> > > > > > > > > wrote:
> > > > > > > > > > Hi Joe,
> > > > > > > > > >
> > > > > > > > > > > If the positive/negative gain
> isn't an
> > > > > issue,
> > > > > > > > couldn't you just
> > > > > > > > > > route
> > > > > > > > > > > the audio thru an A132 VCA and
> get
> > > > > voltage
> > > > > > > > control of the gain
> > > > > > > > > that
> > > > > > > > > > > way
> > > > > > > > > >
> > > > > > > > > > Internally in the A-136 the signal
> is
>

=== message truncated ===


=====
synthfreak(parallel worlds)
athens-greece
1 group owner

__________________________________
Do you Yahoo!
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com