hi selfosc,
the selector sounds excellent!especially the vca
overdrive function makes some awesome sounds!BUT,i
really cannot tell that is sounds better than
my(cheaper)a100...just different.ok,it sounds fat,but
instead of three selector vco's,you can use four a110
in your a100.i think the result will have the same
fatness!what you are paying in the selector is
the(expensive)woodencase,the expensive bigjacks and
the bigger frontplates.together with better
pontetiometers,etc...BUT!,it still sounds as good as
my doepfer and integrator!you have many,many cv inputs
and outputs in the selector modules(that's why you
don't need mixer modules and multiples(well,most of
the times...).so,if you think about it ,the selector
modules are not that much expensive compared to
doepfer and AS.
btw,i love the way it looks!!!!:-)
i intend to expand it further now that jurg oldani
will be releasing a new 10U version of the selector
modules with a much cheaper metal 10U cabinet!
that's all.
bottom line:if i want a FAT sounding low sound i will,
probably, go to my selector,but if i want more
experimental stuff i will run to my a100 and my(now
12U)integrator for help!
bakis.


--- selfoscillate < synaptic_music@... > wrote:

>
> hello bakis,
>
> yes, you are right ;-)
> i would also prefer a doepfer-meter.
>
> best wishes
>
> self oscillate
>
> p.s. by the way, how do you like the technosaurus
> does it really sound that good compared to
> other modulars
> i never gave it a try because i find it is too
> expensive.
>
>
>
> --- In Doepfer_a100@yahoogroups.com , Bakis Sirros
> <synth_freak_2000@y...> wrote:
> > hi self-osc,
> > no!.the doepfer A1 vu-meter should be the best
> > choise ;-)
> > bakis.
> >
> >
> > --- selfoscillate <synaptic_music@y...> wrote:
> > >
> > > the analogue solutions vu-meter isn't available
> > > anymore.
> > > the analogue systems vu-meter should be a better
> > > choice.
> > >
> > > best wishes
> > >
> > > self oscillate
> > >
> > >
> > > --- In Doepfer_a100@yahoogroups.com , "unknown
> freak"
> > > <cgraef@n...>
> > > wrote:
> > > > Have you considered getting Analogue
> Solutions' VU
> > > module It
> > > would blend
> > > > right into your rack.
> > > >
> > > > > -----Original Message-----
> > > > > From: Bakis Sirros
> > > 2
> > > > > Sent: Sunday, May 04, 2003 4:56 PM
> > > > > To: Doepfer_a100@yahoogroups.com
> > > > > Subject: Re: 1 Re: A-136 CV
> > > question
> > > > >
> > > > >
> > > > > hi list,
> > > > > isn't it sad to try to figure out what's
> going
> > > on
> > > > > inside the a100 by watching the a170 or a185
> or
> > > > > a175...little leds (btw,i do the
> > > same...).that's why
> > > > > i have always proposed that we need a
> vu-meter
> > > > > module.so,if you think you need one(like i
> > > do)vote in
> > > > > the vu-meter poll....
> > > > > bakis.
> > > > >
> > > > >
> > > > > --- Joe Buechler <buechlerjoe@t...> wrote:
> > > > > > Timothy, you're not the only one who needs
> to
> > > > > > correct himself five
> > > > > > minutes after posting :-)
> > > > > >
> > > > > > That's how long it took me, adjusting the
> > > voltage
> > > > > > from an A176 CV
> > > > > > Source, and watching the LEDs on an A170,
> to
> > > > > > convince myself that the
> > > > > > A136 does indeed process the A, +A, and -A
> > > paths
> > > > > > independently, and
> > > > > > then sums the result. My A132 suggestion
> was
> > > all
> > > > > > wet.
> > > > > >
> > > > > > If nothing else, I've learned a little bit
> > > more
> > > > > > about the A136 today.
> > > > > >
> > > > > > Joe
> > > > > >
> > > > > > --- In Doepfer_a100@yahoogroups.com , "Joe
> > > Buechler"
> > > > > > <buechlerjoe@t...>
> > > > > > wrote:
> > > > > > > Timothy, the A136 User's manual says
> that
> > > the
> > > > > > signal is split into
> > > > > > > three parts, but no signal flow diagram
> is
> > > > > > provided. (This is only
> > > > > > > the least of the problems with the A136
> > > > > > documentation). The
> > > > > > > signal diagram on the module front panel
> > > suggests
> > > > > > that the "A" gain
> > > > > > > is applied BEFORE the signal is fed to
> the
> > > > > > positive and negative
> > > > > > > clipping circuits. That's why I made the
> > > > > > suggestion that I did.
> > > > > > >
> > > > > > > I suppose I could spend some time
> > > experimenting to
> > > > > > determine the
> > > > > > > actual signal path, but it's a tedious
> > > business
> > > > > > without a scope. I
> > > > > > > wish bakis would nudge Dieter to
> describe
> > > the A136
> > > > > > signal path, and
> > > > > > > correct all the errors in the User's
> Guide
> > > while
> > > > > > he's at it.
> > > > > > >
> > > > > > > Joe
> > > > > > >
> > > > > > > --- In Doepfer_a100@yahoogroups.com ,
> "Tim
> > > > > > Stinchcombe"
> > > > > > <timothy@t...>
> > > > > > > wrote:
> > > > > > > > Hi Joe,
> > > > > > > >
> > > > > > > > > If the positive/negative gain isn't
> an
> > > issue,
> > > > > > couldn't you just
> > > > > > > > route
> > > > > > > > > the audio thru an A132 VCA and get
> > > voltage
> > > > > > control of the gain
> > > > > > > that
> > > > > > > > > way
> > > > > > > >
> > > > > > > > Internally in the A-136 the signal is
> > > split into
> > > > > > three paths, and
> > > > > > > > the 'A' gain knob affects just one of
> > > these, and
> > > > > > it's the
> > > > > > > interaction
> > > > > > > > of this path with the other two that
> > > produces
> > > > > > all the interesting
> > > > > > > > waveshaping effects. I suspect that
> doing
> > > what
> > > > > > you suggest just
> > > > > > > > probably wouldn't be so interesting.
> > > > > > > >
> > > > > > > > Tim
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > > =====
> > > > > synthfreak(parallel worlds)
> > > > > athens-greece
> > > > > 1 group owner
> > > > >
> > > > > __________________________________
> > > > > Do you Yahoo!
> > > > > The New Yahoo! Search - Faster. Easier.
> Bingo.
> > > > > http://search.yahoo.com
> > > > >
> > > > >
> > > > > To unsubscribe from this group, send an
> email
> > > to:
> > > > > doepfer_a100-unsubscribe@yahoogroups.com
> > > > >
> > > > >
> > > > >
> > > > > Your use of Yahoo! Groups is subject to
> > > http://docs.yahoo.com/info/terms/
> > > > >
> > > > >
> > > > >
>

=== message truncated ===


=====
synthfreak(parallel worlds)
athens-greece
1 group owner

__________________________________
Do you Yahoo!
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com