hello,
i have it but i would much prefer a doepfer one.the
an.sol. module is in my concussor system...
also,it is a very,very cheap vu-meter.it has a dark
green color that is really difficult to see.i would
prefer something like the AS vu-meter (or the vcs3
meter)that's white,more presice and have a bigger
display.
but,as i said,i would prefer a doepfer module,anyway!
bakis.


--- unknown freak < cgraef@... > wrote:

> Have you considered getting Analogue Solutions' VU
> module It would blend
> right into your rack.
>
> > -----Original Message-----
> > From: Bakis Sirros
> [mailto: synth_freak_2000@... ]
> > Sent: Sunday, May 04, 2003 4:56 PM
> > To: Doepfer_a100@yahoogroups.com
> > Subject: Re: 1 Re: A-136 CV question
> >
> >
> > hi list,
> > isn't it sad to try to figure out what's going on
> > inside the a100 by watching the a170 or a185 or
> > a175...little leds (btw,i do the same...).that's
> why
> > i have always proposed that we need a vu-meter
> > module.so,if you think you need one(like i do)vote
> in
> > the vu-meter poll....
> > bakis.
> >
> >
> > --- Joe Buechler < buechlerjoe@... > wrote:
> > > Timothy, you're not the only one who needs to
> > > correct himself five
> > > minutes after posting :-)
> > >
> > > That's how long it took me, adjusting the
> voltage
> > > from an A176 CV
> > > Source, and watching the LEDs on an A170, to
> > > convince myself that the
> > > A136 does indeed process the A, +A, and -A paths
> > > independently, and
> > > then sums the result. My A132 suggestion was all
> > > wet.
> > >
> > > If nothing else, I've learned a little bit more
> > > about the A136 today.
> > >
> > > Joe
> > >
> > > --- In Doepfer_a100@yahoogroups.com , "Joe
> Buechler"
> > > <buechlerjoe@t...>
> > > wrote:
> > > > Timothy, the A136 User's manual says that the
> > > signal is split into
> > > > three parts, but no signal flow diagram is
> > > provided. (This is only
> > > > the least of the problems with the A136
> > > documentation). The
> > > > signal diagram on the module front panel
> suggests
> > > that the "A" gain
> > > > is applied BEFORE the signal is fed to the
> > > positive and negative
> > > > clipping circuits. That's why I made the
> > > suggestion that I did.
> > > >
> > > > I suppose I could spend some time
> experimenting to
> > > determine the
> > > > actual signal path, but it's a tedious
> business
> > > without a scope. I
> > > > wish bakis would nudge Dieter to describe the
> A136
> > > signal path, and
> > > > correct all the errors in the User's Guide
> while
> > > he's at it.
> > > >
> > > > Joe
> > > >
> > > > --- In Doepfer_a100@yahoogroups.com , "Tim
> > > Stinchcombe"
> > > <timothy@t...>
> > > > wrote:
> > > > > Hi Joe,
> > > > >
> > > > > > If the positive/negative gain isn't an
> issue,
> > > couldn't you just
> > > > > route
> > > > > > the audio thru an A132 VCA and get voltage
> > > control of the gain
> > > > that
> > > > > > way
> > > > >
> > > > > Internally in the A-136 the signal is split
> into
> > > three paths, and
> > > > > the 'A' gain knob affects just one of these,
> and
> > > it's the
> > > > interaction
> > > > > of this path with the other two that
> produces
> > > all the interesting
> > > > > waveshaping effects. I suspect that doing
> what
> > > you suggest just
> > > > > probably wouldn't be so interesting.
> > > > >
> > > > > Tim
> > >
> > >
> >
> >
> > =====
> > synthfreak(parallel worlds)
> > athens-greece
> > 1 group owner
> >
> > __________________________________
> > Do you Yahoo!
> > The New Yahoo! Search - Faster. Easier. Bingo.
> > http://search.yahoo.com
> >
> >
> > To unsubscribe from this group, send an email to:
> > doepfer_a100-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
> >
>
>
>

=====
synthfreak(parallel worlds)
athens-greece
1 group owner

__________________________________
Do you Yahoo!
The New Yahoo! Search - Faster. Easier. Bingo.
http://search.yahoo.com