I would combine a low-cost VCA with the A140 for voltage control of
envelope intensity.

I'd also combine a low-cost vca (with dual signal inputs instead of
dual CV inputs) with half a trigger modifier to produce a 4HP logic
module (and, or, not).

I'd combine a two-channel mixer/attenuator with offset control, with
an A150 switch to produce a comparitor.

Here's one I've mentioned before - I'd add individual outputs to
the CV mixer to produce a quad VCA/attenuator/mixer. Oh yeah, throw in
offset voltages and a moving-coil voltmeter :-)

Joe

--- In Doepfer_a100@yahoogroups.com , "ilanode" <techmeier@w...> wrote:
> The suggested mixer sounds cool. But even more combined modules
since
> if you have a small system a dual S & H is of little use while a S &
> H combined with a Slew Limiter would be great. The Trigger Delay
> could be housed with a VC Switch for trigger signals (i.e. trigger
> version of A150). One low cost VCA could go with VC Switch for audio
> signals… And those having use for 2 S & H can live with 2 slew
> limiters as well… Regards Ilanode
>
>
>
> --- In Doepfer_a100@yahoogroups.com , Florian Anwander
> <Florian.Anwander@c...> wrote:
> > Hi everybody,
> >
> > I have two suggestions regarding new modules:
> >
> > The first is an addon-Mixer for filters and similar modules: If I
> want to
> > mix several CV _AND_ several Audio-Signals for one Filter, I need
> two
> > Modules. But usually I do not need all four inputs of a mixer. So
> my new
> > mixer consists of a three channel audio mixer and a two channel
dc-
> mixer
> > for control voltages with an additional 1:1-feedthrough for the
CV-
> Bus, and
> > finally a row of three Multiples to get additional outputs:
> >
> >
> > o-POTI-+ /----o -> to Audio-In
> > log | |
> > o-POTI-+-/
> > log | /--o -> to CV1-In
> > o-POTI-+ |
> > log | o
> > | |
> > o-POTI-+---/ o Multiples
> > lin | |
> > o-POTI-+ o
> > lin |
> > ^
> > from CV-Bus
> >
> >
> >
> >
> > The other idea is, that I do not need double modules like the A170
> or the
> > A162, or A175, A150, A148, A130. So the suggestion would be to
> produce
> > combined modules, that provide different functions. Especially for
> smaller
> > (3HE) systems it is annoying that you waste space with seldom used
> > functions.
> >
> > Any oppinions
> >
> > Florian