That is true, but mine also seems very sensite to room temperature. It tune
very differently at 19 celsius than at 23 celsius and that is just plain
crazy too me. The A111doesn't do that neither the AS95s. So I will never buy
another A110 unless very cheap and as LFO ;)

As for the quality of doepfer modules I can't compare to much, but I don't
think they are bad. The ADSRs are the fastest I have if you don't count the
VCADSR but that is another thing.

----- Original Message -----
From: "selfoscillate" < synaptic_music@... >
To: < Doepfer_a100@yahoogroups.com >
Sent: Tuesday, March 25, 2003 7:26 AM
Subject: 1 Re: tuning and scale


>
> the a110 vco needs approxímately 45 minutes time for
> warming up. maybe this is why it gets out of tune
>
> best wishes
>
> self oscillate
>
>
> --- In Doepfer_a100@yahoogroups.com , "Andreas Lindholm"
> <andreas.k.lindholm@t...> wrote:
> > I have had theese kind of problems myself with my A110 and that is
> why I
> > hate it. I have recalibrated the damn thing about 20 times or so
> and it
> > always gets out of tune after a while. So now I have given up and
> use it as
> > an LFO. That's not very helpful and perhaps I have a crazy one, but
> you are
> > not alone ;)
> >
> >
> > ----- Original Message -----
> > From: "Jed Cappelli" <exacta@m...>
> > To: < Doepfer_a100@yahoogroups.com >
> > Sent: Monday, March 24, 2003 7:06 PM
> > Subject: 1 Re: tuning and scale
> >
> >
> > > hello all,
> > >
> > > i am the owner of an A-100 basic system who just joined your
> group. it
> > seems as though the oscillators(A-110) in my system are not exactly
> in tune
> > with eachother, when both the range and the fine tune (set to 0)
> are set the
> > same, one oscillator is slightly higher in pitch. its slight, but
> still
> > audible. is this normal if not, does anyone know of an internal
> > potentiometer of some sort, that i would be able to calibrate
> also, with
> > the factory reference offset at 0, should the A-100 be in tune with
> the rest
> > of my synths, i.e. when i press C on my midi controller, should the
> doepfer
> > be playing a C (when the tune is on 0) this does not seem to be
> the case,
> > so i adjusted the ref. offset to compensate. also on ref. offset,
> i am not
> > sure how stable the A-110 modules are in general, for example, when
> setting
> > the reference offset should i do this with the tune set to 0 or
> should i
> > set the tune at say... 5, to give my self room in case i have make
> minor
> > adjustments up or do!
> > > wn
> > >
> > > about scaling: every once in a while my midi interface module A-
> 190 seems
> > to reset to a crazy scaling where the bottom octave plays a
> disturbing
> > augmented scale, and then all other keys play the same high
> frequency (i
> > have no idea why this sometimes happens, and any insight into the
> causes
> > would also be immensly helpful). so... when i reset the A-190 to
> the
> > default factory settings the scaling is always slightly off. i
> have read
> > the manual about how to adjust the scaling, and i seem to have done
> it prope
> > rly, however, the language and wording in the manual can be slightly
> > difficult to completely understand. my questions on this issue
> are, do i
> > have to change the bottom note once i initialize the A-190 or can i
> leave it
> > as note number 36 cuz in the manual it reads "After setting the
> bottom note
> > and voltage offset...". When setting the voltage offset to tune
> the osc. to
> > the rest of my synths, which note should i be pressing cuz if the
> scaling
> > is off, and im tuning a note!
> > > in the middle of the keyboard wont the tuning then change a bit
> once i
> > adjust the scaling what is the best way to tune the synth i have
> a guitar
> > tuner im using, and im not sure whats the best wave to use as to not
> > introduce any harmonics that might throw the tuner off, would sine
> be best
> > and finally which key should i be pressing when setting the scale,
> 2, 3, or
> > 4 octaves up from the bottom note which is best in the manual it
> says "an
> > octave or several octaves above the bottom note" a bit vague isnt
> it
> > >
> > > im sorry to assault you guys with this violent barrage of
> questions and
> > interrogation, but im a fairly new user who is trying to get the
> most out of
> > this awesome machine and im excited to have found other owners of
> this synth
> > who i can correspond with.
> > >
> > >
> > > To unsubscribe from this group, send an email to:
> > > doepfer_a100-unsubscribe@yahoogroups.com
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> > >
> > >
> > >
>
>
>
> To unsubscribe from this group, send an email to:
> doepfer_a100-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>