Okay bakis, I went back and read the A190 User's Guide. Funny I've
been ignoring that CLOCK menu all this time, there it is right on the
front panel!

Now I have the A190's clock patched to the A155 sequencer, and the
A191's LFO pulse patched to the A150 switch. Everything is in sync.
The fact that the A191 is out of phase makes the switch work
correctly. The A191 pulse starts LOW, so the switch starts at I/O1,
then after 8 sequencer steps the pulse goes HIGH and the switch goes
to I/O2. I wonder if I hallucinated the A191 ever being in phase
before

I don't need the Clock Divider or the Trigger Modifier with this
setup. The only glitch is:

******************************
The A155 now starts at step 2!
******************************

I guess it isn't the long Midi chain from your Atari causing that.

Joe

--- In Doepfer_a100@y..., "buechlerjoe" <buechlerjoe@t...> wrote:
> Hi bakis
>
> I assume you step down the A190's clock output with an A160 clock
> divider I like to keep my A160 available for switching between the
> A155's rows. Is there another way
>
> Joe
>
> --- In Doepfer_a100@y..., bakis Sirros <synth_freak_2000@y...>
wrote:
> > hi joe,
> > about your sync problem...i use the clock output of
> > the a190 to sync my a155.and the "problem" that i have
> > is that the a155 allways starts from the second
> > step.(of course i have the reset out of the a190
> > connected to the input of the a155...).i sync my a155
> > to my old atari st.but it's not a real problem as it
> > allways starts from the second step,everything else is
> > o.k..it might be that i have my a190 connected to midi
> > with my atari after a very long midichain.
> > why don't you use the clock out of the a190
> > bakis.
> >
> > --- buechlerjoe <buechlerjoe@t...> wrote:
> > > I tried out the Shepard generator when I first got
> > > the A191, but I'm
> > > sorry not to have any creative thoughts regarding it
> > > - I haven't
> > > switched the A191 to Shepard mode since then. The
> > > Midi/CV sockets and
> > > the Midi-synced LFOs are far too useful to me. I
> > > consider the A190/191
> > > to be a single integrated Midi interface, and I
> > > can't imagine trying
> > > to get by with just the A190 alone.
> > >
> > > A thought occurred to me about my sync problem. My
> > > previous master
> > > clock source might have been confusing the A191 in
> > > some mysterious
> > > way, sometimes leaving it in phase, sometimes out of
> > > phase. Perhaps it
> > > was in the "out of phase" state when I switched over
> > > to the Regelwerk.
> > > I'm going to temporarily re-connect the original
> > > clock source, and try
> > > to get the A191 back to the "in phase" state. If
> > > that doesn't work,
> > > I'll directly email Doepfer about the problem.
> > >
> > > Joe
> > >
> > > --- In Doepfer_a100@y..., bakis Sirros
> > > <synth_freak_2000@y...> wrote:
> > > > hi and wellcome to the list!
> > > > i wish i could help but,i don't have an a191...
> > > > by the way,as you have this module,tell us ,have
> > > you
> > > > used the shepard generator any creative
> > > thoughts
> > > > synthfreak
> > >
> > >
> >
> >
> >
> > =====
> > synthfreak(parallel worlds)
> > athens-greece
> > 1 group owner-moderator
> >
> > __________________________________________________
> > Do You Yahoo!
> > Send your FREE holiday greetings online!
> > http://greetings.yahoo.com