Hi Florian, I agree with you on the digital buss. I mentioned it in
the tkb poll on how it would able to control several sequencer
modules like the sh101 style sequencer module for instance. However,
I would rather see a trunk line module to bring buss outlets from the
TKB to a front panel like a reverse mult. 1 or 2 inputs on the front
panel and 2 to 4 connectors per input on the back for the sequencer
modules. this would create a much tidier front panel area than having
ribbon cables all over. it might suffocate an already tight
environment.

regards,
RM


--- In Doepfer_a100@yahoogroups.com , Florian Anwander
<Florian.Anwander@c...> wrote:

> Hi Bakis
>
> > doepfer should manufacture the touch
> > sensor keyboard with all the a154 features included
> > AND the a154 module to enable all the a155 users out
> > there to greatly enhance their a155 features!!!
> I think, the solution might be a standardized digital bus for

sequencer

> orientated modules. Accessible from the front side of the modules.

10 pins

> should be enough for a 5Bit-addressing (=32 Steps), clock,

start/stop,

> reset and ground and +5V. Doepfer could use the same ribbon cable

that is

> used for the supply voltages.
>
> If such a bus exists, modules and keyboards simply could be

combined.

>
> Florian