> Just a quick question about the "jumper for feedback insert"
> mentioned in http://www.doepfer.de/a100_man/A101_6_Jumper.pdf ...
> aren't those the exact same signals as on FB Out and FB In
> I am looking to make a module with switches for the different
> modes (separate switches for each stage, unless somebody tells me
> that makes no sense) and as wondering if I should include 2
> sockets for that feedback jumper.
>
> And thank you for updating the New/Future modules page.
>
> Rigo

That's correct. The lower pin is connected to FB Out and the switching
contact of FB In.

The original version of the A-101-6 included a lot of voltage controlled
switches that were used instead of the jumpers (still mentioned on the
A-101-6 info page). But as this feature would have nearly doubled the priced
of the module we decided to use jumpers instead of the VC switches.

A few more planned modules will be added to the new/future modules page
during the next few days (e.g. A-180-4 quad buffer, A-135-2 slim version of
the voltage controlled mixer, A-197-3 controller module for RGB LED stripes
and some more).

Best wishes
Dieter Doepfer