Hello,

if the clock is working the midi connection is working in principle. Please
check if the midi channel and note range of the transmitter corresponds to
the settings of the A-190-4. And make sure that the required note messages
are really sent by the midi transmitter.

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com [mailto: Doepfer_a100@yahoogroups.com ]
> Gesendet: Montag, 6. August 2018 13:01
> An: Doepfer_a100@yahoogroups.com
> Betreff: 1 Problem with A-190-4
>
> Hi All,
>
>
> I am having a problem with my A-190-4 today and I'm hoping
> someone may be able to assist. My A-190 does not appear to be
> processing CV or Gate signal. I have tried sending signal from a
> midi keyboard and from a korg SQ-1 sequencer but no CV or gate
> signal is produced. I do get a clock signal when the sequencer
> is attached. I have tried to different midi cables also just to
> rule out a bad cable issue.
>
>
> I can scroll through the menu on the A-190 so the module does not
> appear to be frozen.
>
>
> All connections are made using the midi in port, not USB.
>
>
> Would anyone have advice on how to troubleshoot this problem
>
>
> Thanks,
> Colum