> Dear, my Doepfer a1434 VCLFO cycles between -5 volts and +5 volts,
> would it be possible to have it cycling between 0 volts and +5volts
> Or between 0 volts and +10 volts
> Should I try the "offset" and "scale" trimpots on the pcb
>
> http://www.doepfer.de/A100_pictures/doepfer_a143_4.jpg
>
> http://www.doepfer.de/a1434.htm
>
> Thanks!
> Floris

It's not possible to shift the output voltage range of the A-143-4 to
0...+10V. For this an external module (e.g. A-183-2) is required. Do not
change the offset and scale trimming as this will affect only the frequency
scale and frequency offset.

Best wishes
Dieter Doepfer