Hi,

I'm glad to report that I'm up and running again. Pretty sure that the
problem was caused by some ribbon connectors that had come partially adrift
- all it needed was a new fuse.

Thanks to all who've educated me, yet again.


Best wishes.

Tim Burgess

-----Original Message-----
From: Doepfer_a100@yahoogroups.com [mailto: Doepfer_a100@yahoogroups.com ]
Sent: 16 February 2018 12:24
To: Doepfer_a100@yahoogroups.com
Subject: AW: 1 Troubleshooting lack of power on LC9

> Hi,
>
> This is the point I'd like clarification on myself. A U.K. dealer has
> told me that there's 1200mA available spread across both the positive
> and negative supplies, so I'm confused.
>
> Best wishes.
>
> Tim Burgess

This information was wrong. The A-100PSU2 outputs 1200mA for +12V AND 1200mA
for -12V. If you have problems with the supply or system please refer to our
FAQ page:

www.doepfer.com > English > FAQ > A-100 > My A-100 system does no longer
work

Here you find some hints to find out what's wrong if the fuse does blow.

Best wishes
Dieter Doepfer



------------------------------------

------------------------------------


------------------------------------

Yahoo Groups Links