I don't own a Grid, but I think the problem is, that the Grids expects
a reset when the clock is stopped.

In the end you were on the right track, when you pressed the reset
button, while the clock was stopped, but you did not remove the yellow
cable which additionally caused a reset while the clock was running again.

If I am right then the correct handling is like this:
* press stop in Cubase and reset Cubase to zero
* connect clock out of the A-190-8 with clock in of the Grid
* press reset on the Grid
* press start in Cubase

I am not sure, but maybe it would work too if you connect the A-190-8
stop-output with the Grids reset-input. Should be worth the test.

Florian

On 27.12.16 20:50 , Nicolaj etc@... 1 wrote:
> I own a Doepfer A-190-8 midi clock sync module, and a Mutable Instruments Grids drum sequencer.
> For some reason I cannot get them to sync properly to the song tempo in Cubase.
> Or in other words: the tempo sync ok, but the Grids module doesn’t start in time with Cubase.
> I’m not sure if it’s a problem with the Doepfer module or the Grids module, or if it has something to do with the way I’ve set the communication up between them.
>
> I recorded a video illustrating the issue. Any help is greatly appreciated as I’ve had this issue ever since I first bought these modules.
> Best regards (and happy new year) from Nicolaj.
>
> The video is here:
> https://youtu.be/4mowzjWl9sg
>
> ------------------------------------
> Posted by: Nicolaj< etc@... >
> ------------------------------------
>
>
> ------------------------------------
>
> Yahoo Groups Links
>
>
>