Il giorno 14/nov/2016, alle ore 11:10, yahoo@... 1 < Doepfer_a100@yahoogroups.com > ha scritto:

> Then it should be no problem. Simply mount the R2M manual to a 1U blind
> panel by means of the four M3 threads at the bottom of the R2M manual
> housing. The lenght of the R2M manual is ~ 600 mm (plus the USB connector).
> If the width of the case is more it should work. I'd recommend to keep the
> housing as it guarantees the mechanical stability required for the pressure
> and position sensors.
>
> Best wishes
> Dieter Doepfer
>
>
>> -----Ursprüngliche Nachricht-----
>> Von: Doepfer_a100@yahoogroups.com [mailto: Doepfer_a100@yahoogroups.com ]
>> Gesendet: Montag, 14. November 2016 10:58
>> An: Doepfer_a100@yahoogroups.com
>> Betreff: Re: 1 R2M Manual Ribbon controller - 1U row
>> installation
>>
>>
>>
>>
>> Thanks, though I imagined a row longer than 84hp, there's some on
>> sale of 90HP, 104HP, 1 row @ 3U + 1 row @ 1U. I do believe that
>> Intellijel makes it. Of course, then it would require some work
>> to manufacture a panel to host the Manual.
>>
>>
>> Best regards, Diego
>>
>>
>>
>> Il giorno 14/nov/2016, alle ore 10:45, yahoo@...
>> 1 < Doepfer_a100@yahoogroups.com > ha scritto:
>>
>>
>>
>> I'm sorry, this will not work because the position sensor is longer than
>> 19". The active area of the position sensor is 500 mm plus the
>> area required
>> for the connector (~ 70mm). That's more than 19" which is about
>> 483 mm. It's
>> not possible to shorten the positions sensor without damaging the
>> sensor (in
>> contrast to the pressure sensor which can be easily shortened).
>>
>> Best wishes
>> Dieter Doepfer
>>
>>> Hello,
>>>
>>> is there anybody who tried to ease installation of the manual
>>> onto a 1U eurorack row
>>>
>>> Thanks
>>
>>
>>
>>
>>
>>
>>
>>
>
>
>
> ------------------------------------
>
> ------------------------------------
>
>
> ------------------------------------
>
> Yahoo Groups Links
>
>
>



------------------------------------

------------------------------------


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
    http://groups.yahoo.com/group/Doepfer_a100/

<*> Your email settings:
    Individual Email | Traditional

<*> To change settings online go to:
    http://groups.yahoo.com/group/Doepfer_a100/join
    (Yahoo! ID required)

<*> To change settings via email:
    Doepfer_a100-digest@yahoogroups.com
    Doepfer_a100-fullfeatured@yahoogroups.com

<*> To unsubscribe from this group, send an email to:
    Doepfer_a100-unsubscribe@yahoogroups.com

<*> Your use of Yahoo Groups is subject to:
    https://info.yahoo.com/legal/us/yahoo/utos/terms/