Hello and welcome,

Like the purpose of the module says, it's an attenuator so it's not likely that it amplifies. 

However, attenuating the hottest source can possibly match with the others who aren't attenuated. 

This might result in a low total signal which has to be amplified again. 

There are modules that are made for these tasks. 

Cheers

Jacco Ville

Op 7 nov. 2016 om 22:26 heeft Diego Ragnini diegora@... 1 < Doepfer_a100@yahoogroups.com > het volgende geschreven:

 

Greetings to everybody,

I am a newbie on this group.

I need some technical info about this module. I don't own this module yet.

I foresee to use it in order to mix 1 signal at 10vpp (eurorack level) + 3 signals at 3vpp (line level).

In order to get them output at approximately the same amplitude, I do believe having to attenuate the higher signal around level 4' and the 3 line level fully clockwise. Do you think it would work

In other terms:
does the attenuator provide an increment of amplitude when the knob is fully clockwise, or simply outputs the original signal level

Best regards,

FM