The first A-157 modules are shipped with the very first version of the firmware. Please report any bugs and/or improvements directly
to Christian Assall ( software@... ). It is possible to update the A-157 firmware via USB. Christian will be able to tell you
details.

I think the problem has to do with the basic question what a reset signal should do:

a) immediate jump to step 1 (or first step if it is not step 1)
b) "prepare" the reset which is carried out when the next clock signal appears

I remember that we had the discussion already when the A-154 was designed about 12 years ago. In case a) the next clock causes an
advance to step 2. In case b) the next incoming clock pulse causes an advance to step 1.

Thank you
Dieter Doepfer

> Hello there again,
>
> Are there any other users of the a157 who experience a rather strange reset behaviour
>
> User example:
>
> Running clock from LFO to A157 and A160/161 combo, clock via multiple.
> Reset both by an A164-1.
> When making a reset while both running the A160/A161 combo is always one step ahead of the A157.
> I noticed that the A157 goes to step 16 with the next clock pulse and then to step 1 and in fact needs two pulses while
> the A160/161 goes to step 1 directly, therefore is one
> step ahead.
> Why does the A157 make this , for me rather
> unnecessary, step which is one too much.
> The A155 will also wait for the next clockpulse when going to step 1 rather then going to step 8 first.
> Maybe something for a future update
> Thoughts are welcome.
>
> Have a nice day everyone.
>
> Jacco Ville
> Holland