No problem ! We are totally snowed under with work and I'm happy if there is also another solution available.

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com [mailto: Doepfer_a100@yahoogroups.com ]
> Gesendet: Dienstag, 15. März 2016 11:23
> An: Doepfer_a100@yahoogroups.com
> Betreff: Re: AW: 1 DIY cv out module to accompany A152
> question
>
>
> I would not wish to take any sales away from Dieter because his stuff is fabulous, but there are of course many others
> out there following in his footsteps and making modules. For a series of fully "modularised" sequencer modules (!) take a
> look at the 'S' series from www.ladik.eu which is a system with masses of potential to make sequencer configurations in
> many different ways.
>
> Jonathan Shapero
> From my iPad Air
>
> > On 15 Mar 2016, at 10:18, yahoo@... 1 < Doepfer_a100@yahoogroups.com > wrote:
> >
> > Hello James,
> >
> > thank you for the detailed annotation. If there are sufficient inquiries we could develop such an expansion unit. But I
> fear that
> > this application is a bit too special (generally the A-152 is far a way from being a good seller)
> >
> > Best wishes
> > Dieter Doepfer
> >
> >
> >> -----Ursprüngliche Nachricht-----
> >> Von: Doepfer_a100@yahoogroups.com [mailto: Doepfer_a100@yahoogroups.com ]
> >> Gesendet: Dienstag, 15. März 2016 00:38
> >> An: Doepfer_a100@yahoogroups.com
> >> Betreff: Re: 1 DIY cv out module to accompany A152 question
> >>
> >>
> >> Since we are talking about expansion modules for the A-152, I thought I would put a suggestion for achieving something
> >> similar with the A-154. I think a good and inexpensive expansion module for the A-154 would be a small panel with 8 jacks
> >> that a stand alone A-154 would plug into, that would provide 16 sequentially addressed gate outs controlled by the A-154.
> >> Basically a gate sequencer instead of the standard A-155. It would be nice if the module had a header to accept the
> >> ribbon from the A-154 and also have a “pass-through) header allowing the connection to more than one module to run in parallel.
> >>
> >> I have always loved the idea of a “modular” sequencer with all the functions of a classic sequencer broken out into
> >> separate modules that could be combined to make a custom sequencer of your own design. With the A-154 as the “brain” of
> >> the system, you could have expansion modules like this gate out module I just described, a small panel with pots for the
> >> CV generating part (that could be chained for more rows), a 16-position sequential switch module, and other modules that
> >> would connect up. This way you could design a “sequencer” with as many rows of CV out, Gate outs, Trigger outs, or
> >> whatever you wanted. It could be as big or small as you wanted.
> >>
> >> I started to make a system like this with my PGM-4X4 series which can be stacked as high as you have cabinet space. in
> >> programmer mode, it can address its columns using a internal, very basic, sequencer or manually or via external gates. I
> >> currently run two of them with the outputs from a A-152 but the A-154 would be a MUCH better controller since it provides
> >> clock outs too.
> >>
> >> I asked Dieter a long time ago about accessing the header on the A-152 and was given the pinout (Thanks Mr.D) which when
> >> buffered for protection reasons, can provide a trigger when the A-152 changes stages. This makes the A-152 a much easier
> >> module to use when using the CV stage address method. If a add-on expansion module was made for the A-152, adding this
> >> trigger out would be a BIG plus for me.
> >>
> >> -James
> >>
> >> James Husted, Designer, Synthwerks LLC • www.synthwerks.com • james@... • info@...
> >>
> >>
> >>
> >>
> >> ------------------------------------
> >>
> >> ------------------------------------
> >>
> >>
> >> ------------------------------------
> >>
> >> Yahoo Groups Links
> >
> >
> >
> > ------------------------------------
> >
> > ------------------------------------
> >
> >
> > ------------------------------------
> >
> > Yahoo Groups Links
> >
> >
> >
>
>
> ------------------------------------
> Posted by: Jonathan < jss9h@... >
> ------------------------------------
>
>
> ------------------------------------
>
> Yahoo Groups Links
>
>
>