> Hallo there,
>
> My first post is a rather new modular user is about the A160-2.
> Just started to make a nice case filled with Doepfer modules.
> Still assembling....
>
> Why is the 160-2 producing a high pulse on reset at all the outputs
>
> I cant get a good reset with sequencers i.e. system gets out of sync.
>
> What is wrong or what am I doing wrong
>
> Cheers

Christian told me that the module works as described on the info page. A reset sets all outputs to zero (in non-inverted mode) but
the next clock signal turns all outputs to high (in non-inverted mode). Please refer to the diagram on the A-160-2 info page. If you
want that all outputs turn to low with the next clock signal you have to choose the inverted mode (lower diagram on the A-160-2 info
page). Pay attention that you can also select the clock polarity, reset behaviour (level or edge) and reset polarity.

Best wishes
Dieter Doepfer