Thanks Dieter. I shall try it out and see if my SQ10 likes it :-)

David

www.movingisliving.co.uk

Sent from my iPhone

On 7 Jan 2015, at 10:31, yahoo@... 1 < Doepfer_a100@yahoogroups.com > wrote:

>> Does the A165 work as a Eurorack to "S" trig converter I was wondering about triggering a Korg SQ10 sequencer.
>>
>>
>> David
>>
>> www.movingisliving.co.uk
>
> The possible use of the A-165 as S trigger converter depends upon the direction:
>
> If you have an S-Trigger signal that has to be converted into a voltage trigger a pull-up resistor has to be added. The procedure is
> described on the A-100 DIY page on our website.
>
> If a voltage trigger has to be converted into a "real" S trigger (i.e. pure switching to GND) another modification is necessary: one
> has to remove R2 and use the collector output of Q1 as S trigger output. But in many cases not a "real" S trigger is required but
> only the inverted signal. In this case simply use the inverted output of the module. I'd try out if this works before you start the
> modification.
>
> Best wishes
> Dieter Doepfer
>
>
>
>
>
>
> ------------------------------------
>
> ------------------------------------
>
>
> ------------------------------------
>
> Yahoo Groups Links
>
>
>