And it is important: The doepfer sockets rely on that you are using a
cable with a mono plug!

Simply hold a stereo plug aside a doepfer socket and you will see, that
the ground connector of the Doepfer socket contacts the shaft of the
plug where the ring of a stereo plug is located:

see http://fa.utfs.org/diy/a100/doepfer_socket_jack.jpg

This does not matter for mono cables. But if you will connect such a
stereo cable with a socket, that picks the ground from the real shaft
position, then the ground will be missing in this connection.

Florian

On 07.10.14 15:02 , Kai Niggemann logiclist@...
1 wrote:

> Mono.
> On 07.10.2014, at 14:56, "syndromeda@... wrote:
>> Does anybody knows if the sockets used on the Multiple A-180-2 are
>> mono or stereo