Hi

i use also a SQ10 with my euro rack. to trigger the sq10 from the A100 there is a spezial cable available by doepfer that changes the different gate phases. i also used the 0/1 conversion from the doepfer logic module or the trigger modifier for this ( you can also use a simple schmitt-trigger ). then you can use them to clock sq10 to A100 or A100 to sq10. just something that converts a 0 volt to 5 volt or 5 volt to 0 volt.

for the random stuff...

cheers

 My original sequence is supplied by a Korg SQ10 - the triggers not being compatible are coming from elsewhere.

I want a basic shape to the sequence with a slight and varying remove from it.

David 

www.movingisliving.co.uk

Sent from my iPhone

On 23 Sep 2014, at 15:13, Nicholas Keller maq163x2@... 1 < Doepfer_a100@yahoogroups.com > wrote:

 

Hello David.

You are speaking my language.

Let's back up a bit.  You said that the S+H is being triggered in time with the original sequence.  In this case, the original sequence basically becomes unnecessary as for each step in the sequence, another voltage is added.  You are correct that the result should never repeat (at least it is highly unlikely) but it is also hardly any relation to the original random-ordered note pattern.  If you reduced the S+H clock to something more like 1 bar, then you would have more of a transposing effect applied to the original random sequence, but I assume this is not the effect you were after.  What type of pattern exactly are you trying to generate  As it is now, your mixed quantized output wouldn't be noticeably different from a more simple 118->148->156 output (unless directly comparing the two in realtime, of course).   What sequencer is creating the initial random pattern

Nick

Sent from the future

On Sep 23, 2014, at 9:05 AM, "David Kellett davidkellettwoulf@... [Doepfer_a100]" < Doepfer_a100@yahoogroups.com > wrote:

 

Hi,

I'm trying to create a randomised sequence. I have an analog sequence of volta going into a quantiser via an A138 Lin. In another channel of the 138 I have a S&H voltage. The S&H is derived from an A148 clocked by the same trigger as the sequence and with the sample being Random control from an A118. I expected that the random S&H voltage would "push" the sequenced notes slightly - so the sequence would be related to the original but never the same. What I get is the sequence or the random - whatever settings I use in the mixer.

So what have I got wrong / not understood

David

www.movingisliving.co.uk

Sent from my iPhone