jumper
i remember having to cut two metal links to stop the
a190 sending cv and gates to the system bus.
bakis.



--- Joe Buechler < buechlerjoe@... > wrote:

> I removed the jumper to break the connection from my
> A190 to the
> bus, and patch the A190, or the A156, or whatever,
> to the A185
> instead.
>
> Hope that helps.
>
> Joe
> --- In Doepfer_a100@y..., "duffnuff" <duffnuff@h...>
> wrote:
> > hmm, ok. thanks for the suggestion but i'm
> confused as to how i
> > would patch it in. does it work just being on the
> bus so i start
> > drawing cv from the 185 instead of the 190
> > -duff
> >
> >
> > --- In Doepfer_a100@y..., "Joe Buechler"
> <buechlerjoe@t...>
> > wrote:
> > > I had the same problem until I added the Bus
> Access module
> > to
> > > buffer the pitch CV. Then the problem went away.
> Ditto for A156
> > -
> > > produced pitch CV.
> > >
> > > Joe
> > > --- In Doepfer_a100@y..., "duffnuff"
> <duffnuff@h...> wrote:
> > > > i'm having problems performing simple
> portamento using
> > the
> > > > a171 vc slew limiter. when i apply the a171
> slew limiter to
> > pitch
> > > > cv it results in serious intonation problems.
> i went back and
> > > > checked the a190's scale adjustment w just the
> a190 and an
> > > > oscillator, checking across 4 octaves w a
> tuner, it's fine.
> > > >
> > > > seems my a171 will not pass cv cleanly
> regardless of slope.
> > it
> > > > causes portamento, will adjust from slow to
> fast, but notes
> > are
> > > > wrong.
> > > >
> > > > when i patch the a190's cv1 output to the
> a171, then to the
> > osc,
> > > > middle C drops 1/4 step, and intonation goes
> completely out
> > of
> > > > whack. this occurs even when using only one
> osc. very
> > > > frustrating. completely unusable. that's w
> no slew applied. i
> > > > also taped the middle C key down and left it
> for several
> > minutes
> > > > but no change in pitch during that period.
> > > >
> > > > could this possibly have anything to do w
> using non-doepfer
> > > > osc's i recall having to alter the scaling
> of the a190 when i
> > > > began using it w a pair of ASys rs95's. once
> the scaling was
> > > > adjusted they played perfectly together,
> except now when the
> > 171
> > > > intercepts the pitch cv, then the a190's
> scaling wants to be
> > > > adjusted back down to doepfer's default
> position.
> > > >
> > > > any thoughts is there a bias adjustment i
> don't know about
> > > > within the 171
> > > > -duff
>
>

=====
synthfreak(parallel worlds)
athens-greece
1 group owner-moderator

__________________________________________________
Do you Yahoo!
Y! Web Hosting - Let the expert host your web site
http://webhosting.yahoo.com/