I removed the jumper to break the connection from my A190 to the
bus, and patch the A190, or the A156, or whatever, to the A185
instead.

Hope that helps.

Joe

--- In Doepfer_a100@y..., "duffnuff" <duffnuff@h...> wrote:
> hmm, ok. thanks for the suggestion but i'm confused as to how i
> would patch it in. does it work just being on the bus so i start
> drawing cv from the 185 instead of the 190
> -duff
>
>
> --- In Doepfer_a100@y..., "Joe Buechler" <buechlerjoe@t...>
> wrote:
> > I had the same problem until I added the Bus Access module
> to
> > buffer the pitch CV. Then the problem went away. Ditto for A156
> -
> > produced pitch CV.
> >
> > Joe
> > --- In Doepfer_a100@y..., "duffnuff" <duffnuff@h...> wrote:
> > > i'm having problems performing simple portamento using
> the
> > > a171 vc slew limiter. when i apply the a171 slew limiter to
> pitch
> > > cv it results in serious intonation problems. i went back and
> > > checked the a190's scale adjustment w just the a190 and an
> > > oscillator, checking across 4 octaves w a tuner, it's fine.
> > >
> > > seems my a171 will not pass cv cleanly regardless of slope.
> it
> > > causes portamento, will adjust from slow to fast, but notes
> are
> > > wrong.
> > >
> > > when i patch the a190's cv1 output to the a171, then to the
> osc,
> > > middle C drops 1/4 step, and intonation goes completely out
> of
> > > whack. this occurs even when using only one osc. very
> > > frustrating. completely unusable. that's w no slew applied. i
> > > also taped the middle C key down and left it for several
> minutes
> > > but no change in pitch during that period.
> > >
> > > could this possibly have anything to do w using non-doepfer
> > > osc's i recall having to alter the scaling of the a190 when i
> > > began using it w a pair of ASys rs95's. once the scaling was
> > > adjusted they played perfectly together, except now when the
> 171
> > > intercepts the pitch cv, then the a190's scaling wants to be
> > > adjusted back down to doepfer's default position.
> > >
> > > any thoughts is there a bias adjustment i don't know about
> > > within the 171
> > > -duff