A180-2, yes please....

--- In Doepfer_a100@yahoogroups.com , Bakis Sirros <synth_freak_2000@...> wrote:
>
> Dieter says:
>
> "The preliminary information about the A-190-8 and the A-180-2 are now
> online.
> They can be found via the "A-100 new/planned" modules link. The
> available 10
> outputs of the A-190-8 are not yet fixed. If the users think
> other
> combinations of clocks or start/stop/reset outputs would be better we
> still
> can change that because the outputs are generated by the firmware of
> the
> processor. After all it's only the printing at the front panel. We
> omitted
> the usual DIN SYNC socket because it's nothing new but only clock
> and
> start/stop on two pins of the DIN socket. If there are sufficient
> inquiries
> we may offer a special cable with two 3.5 jack plugs on one side
> and a DIN
> plug on the other."
>
> A190-8:
> http://www.doepfer.de/a1908.htm
>
> A180-2:
> http://www.doepfer.de/a180.htm
>
> also more news:
> Dieter says: "In December the A-192-2 (Dual CV/Gate-to-USB/Midi interface) will be
> available
> and even the hardware of polyphonic CV/Gate interface A-190-5 is
> ready.
> Christian is about to program the firmware. But it takes longer than
> expected
> and so the A-190-5 will be available early in 2013."
>
> A192-2:
> http://www.doepfer.de/a1922.htm
>
> A190-5:
> http://www.doepfer.de/a1905.htm
>
>
> thanks,
> Bakis.
>
>  
> Bakis Sirros
> www. parallel - worlds - music. com
> www. facebook. com/ pages/Parallel-Worlds/192093934136476
> www. myspace. com/ interconnectedmusic
> www. myspace. com/ memorygeist
> www. DiN. org. uk
> www. vu-us. com
>
> [Non-text portions of this message have been removed]
>